LED LEOPARD SERIES MINI FLOOD & WALL LIGHT
Instruction Manual
Add:
1501 Industrial Way N, Toms River, NJ 08755
Phone:
866-222-8866
E-mail:
info@abovealllighting.com
Web:
www.AboveAllLighting.com ©2016 ABOVE ALL. Inc. All rights reserved
SUITABLE FOR MODEL
1
WIRE CONNECTION
INPUT VOLTAGE: 120-277V,120V,277V, NON-DIMMING
SAFETY INSTRUCTION
Maintenance Caution
READ CAREFULLY BEFORE INSTALLING FIXTURE.
PLEASE KEEP THIS MANUAL FOR FUTURE USE.
Fixtures must be wired in accordance with the National
Electrical Code and all applicable local codes. Proper
grounding is required for safety.
THIS PRODUCT MUST BE INSTALLED IN
ACCORDANCE WITH THE APPLICATION CODE BY
A PERSON FAMILIAR WITH THE CONSTRUCTION
AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
MAKE CERTAIN POWER IS OFF BEFORE
INSTALLING OR MAINTAINING FIXTURE.
CHECK THAT VOLTAGE IS COMPATIBLE WITH
FIXTURE DRIVER. USE APPROVED CONNECTORS
FOR ALL ELECTRICAL CONNECTIONS.
1. Review the wire connection before beginning, and
make sure fixture is grounded properly.
2. For lighting controls, follow control instructions
carefully.
3. Turn power off and wait for fixture to cool before
performing maintenance.
4. Maintenance must be done by professionals.
Make the following Electrical Connection:
a) Connect the voltage supply line to ACL in black.
b) Connect the voltage supply Neutral to ACN in white
c) Connect green ground lead to the supply ground lead.
INPUT VOLTAGE: 120-277V,120V,277V, DIMMING
Make the following Electrical Connection:
a) Connect the voltage supply Line to ACL in Black.
b) Connect the voltage supply Neutral to ACN in White
c) Connect Green ground lead to the supply ground lead
d) Connect the supply positive dimming lead to Dim+ lead
in Red
e) Connect the supply negative dimming lead to Dim- lead
in Blue.
INSTALLATION
ITEMS REQUIRED
Accessory Pack Included:
Wire Nut x 3(Non-dimming) / 5(Dimming)
O-ring x 2
Tools Prepared by Customer:
Phillips screwdriver
Electrical wiring tools
Water tight cord connector
Bracket attachment hardware
Appropriate tools
