background image

Skylight LX™

HARDWARE INSTALLATION GUIDE

Specifications

Power

Input Voltage Range

20-57V

DC

, 3.0-1.1A

Power Consumption

40W

Nom

, 55W

Max

SFP+ Slots Power Capability

2.0W

Max

 Per Slots

Physical

Dimensions (W x H x D)

201 x 38 x 264mm (7.9 x 1.5 x 10.4")

Weight

1655g (59oz)

Environmental

Operating Temperature

Commercial Model: 0C to 50C 

Hardened Model: -40C to 65C

Storage Temperature

-40C to 70C

Operating Humidity

5% to 95% RH, Non Condensing

Storage Humidity

5% to 95% RH, Non Condensing

Maximum Altitude

2000 m, Above Sea Level

Regulation & Standard Compliance   

(Unique ID: NODE2c)

Safety

60950-1

EMC

Class A

Telcordia

*

NEBS Level-3

Ethernet Ports

Interconnection

The intra-building Ethernet ports in this equipment are 

suitable for connection to intra-building, or unexposed 

wiring or cabling only. These intra-building ports 

MUST NOT be metallically connected to interfaces that 

connect to the OSP or its wiring. These interfaces are 

designed for use as intra-building interfaces only (Type 

2 ports as described in GR-1089) and require isolation 

from the exposed OSP cabling. The addition of Primary 

Protectors is not sufficient to connect these interfaces 

metallically to OSP wiring. 

Compliance Statements

423-044-00, Revision 3

Published: 2020-12-17

FCC Class A

This equipment has been tested and found to comply with the limits for a Class A digital device, 

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection 

against harmful interference when the equipment is operated in a commercial environment. 

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and 

used in accordance with the instruction manual, may cause harmful interference to radio com-

munications. Operation of this equipment in a residential area is likely to cause harmful interfer-

ence in which case the user will be required to correct the interference at his own expense.

VCCI–A

*

Note: 

Contact Accedian technical support for exceptions.

KCC-A

Attention: 

This product, like all electronic products, uses semiconductors that  

can be damaged by electrostatic discharge (ESD). Always observe appropriate 
precautions when handling.

Warning: 

Potential for damage to equipment or personal injury.

Conventions

Attention: 

This symbol indicates that the surface is hot and to use caution to avoid 

touching it.

Protective grounding point

  この装置は、クラスA情報技術装置です。この装置を家庭環境で使用すると電
波妨害を引き起こすことがあります。この場合には使用者が適切な対策を講ずる
よう要求されることがあります。

사용자 안내문  
이 기기는 업무용 환경에서 사용할 목적으로 적합성평가를 받은 기기로서 가
정용 환경에서 사용하는 경우 전파간섭의 우려가 있습니다.

 You must install the unit in a restricted access location in the following cases:

 

If you are using a DC power connection and the ambient temperature is more 

that 50°C.

 

If you are using a contralized DC power connection.

Reviews: