background image

ACCUSPLIT

 

EAGLE

 

920HRM

 

Heart Rate Monitor 

 

1.0 Introduction 

 
Thank you for your purchase. This watch includes 5 functional modes: Current Time, Heart 
Rate Alert, Daily Alarm, Chronograph and Timer Mode. 
 
With this watch, you also get ECG accurate heart rate readings without the use of a chest 
strap! How?  Simply put the watch on your wrist, place two fingers on the sensors located on 
the face of  the watch, and watch your heart rate display in the digital window  within 
seconds! 
 

WARNING!

 

 

DO NOT use this Watch for commercial or professional purposes. 

 

Make sure that you fully understand the functions and limitations of this watch before 
using it.

 

 

This Watch is a supplementary device for measuring heart rate; it is NOT a substitute for 
medical devices. You should periodically compare the heart rate reading acquired with 
this watch with the reading from a doctor 

 

Consult a doctor or trainer 

 

2.0 Care 

and 

Maintenance 

 

 

Read this manual thoroughly before using the watch. 

 

Avoid rough usage or severe impacts to the Watch. 

 

Store watch in a dry place when it is not in use. 

 

When the battery runs out, it is recommended to have a professional replace the battery. 

 

Clean your watch occasionally with a soft moistened cloth. 

 

DO NOT expose the watch to chemicals such as gasoline and alcohol; these chemicals 
will damage the Watch. 

 

3.0 

Diagrams of the watch 

 

 

 

ACCUSPLIT 

EAGLE

 

920HRM Instructions

 

 

1 of 18 

Summary of Contents for EAGLE EAGLE 920HRM



















Reviews: