ACE AUTOMATION Europe - support.aceautomation.eu
CommandHMI series
Installation Instructions
Amazing PLCs & HMIs
MQTT Modbus Gateway
Thank you for purchasing a commandHMI!
Before installing or operating the unit, please read this installation
guide carefully to ensure correct use.
For detailed specifications and operation, please refer
to the
[Help] menu
of the
HMI-Tool software
found at
support.aceautomation.eu
Compliances FCC, Class A
Tested to conform to European CE requirements EN50022/24
Dielectric strength test 1000V AC,1 minute
IP 65 Front Panel
Unpacking the Unit
•
This installation Instruction
•
CommandHMI
•
Power connector on the HMI
•
4 brackets with screws
Cutout and Power supply
HMI Screen size
Cutout
Power supply
4.3”
16/9
142 x 85 mm
12 - 24 VDC +/-15%
5.0”
16/9
157 x 95 mm
12 - 24 VDC +/-15%
7.0”
16/9
192 x 138 mm
12 - 24 VDC +/-15%
10.2”
16/9
259 x 201 mm
24 VDC +/-15%
→
Do not press the screen (but the frame) to
insert the HMI into the cut-out of its slot!
