4RADE#ENTER$RIVE
0ALMDALE#! &AX WWW!CE#ANOPYCOM
ACECANOPY
ACECANOPY
10’x10’ Party Tent
PARTS LIST
Quantity
Description
4
9’2” Poles
8
4
1
1
6’10” Poles
4-Way Corner Connector
4-Way Top Connector
Party Tent Top
Roof and Top:
1.
Place the roof pipes on the ground with the correct connectors next to them (as shown on next page).
2.
Connect the pipes and connectors.
3.
Drape the cover over the roof and secure the corners first (start with one corner and then the opposite corner)
using the ball bungee’s. Once the corners are secured, you may fasten the rest of the ball bungees into the
remaining grommets (shown below). Please note: there will be a 4”-6” gap between the tarp and the pole.
Attaching the legs:
4.
Lift one side of the roof and slide in the leg poles.
5.
Lift the other side of the canopy and slide in the remaining leg poles.
The canopy cover and any side walls or peak walls (sold seperately) will be attached to the canopy frame using the same process illustrated
above. Please note: side walls will also have the same 4” - 6” gap between the tarp and the pole.
Pull string end of bungee through the grommet.
Wrap string around the pole and over the ball to secure it.
Warranty Policy
We want you to be completely satisfied with every item that you purchase online from AceCanopy.com. We have a 30-day limited warranty.
We will repair or replace any part of the canopy within 30 days of purchase if defective. This limited warranty does not cover damage due to
neglect, wind, snow, fire, or misuse; nor does this limited warranty cover damage resulting from the canopy not having been securely fastened
down nor from improper installation. Ace Canopy makes no other warranty and the remedy of repair or replacement is the exclusive remedy.
Ace Canopy is not liable for indirect, incidental, or consequential damages in connection with the use of any product sold on this web site,
including any cost or expense of providing substitute equipment or service during periods of non-use.
