background image

Quick Start Guide 

 

Mouse Specifications   

Model:

 

AMR800

 

                                                        Weight: 50±10g   

Buttons: 3                                                                      Connector Type: RF 2.4GHz 

Sensor Type: Optical                                                      DPI: 1600                                     

Dimensions (L x W x H): 95.2 x 58.5 x 34.6 mm     

 

Device Features     

 

 

Keyboard Specifications 

                     

                   

 

Model: 

AKR920 

       

                                               

       

Weight: 350±20g 

Dimensions (L x W x H): 305 x 145 x 25.5 mm     

 

  Connector Type: RF 2.4GHz 

     

Device Features 

 

1.  LED Indicator 

Power On: LED is on for 10 seconds 
Low Battery: 

  Blinks for 10 seconds and turns off after power on 

  Flashes continuously during work, and turns off after 10 seconds. 

 

Summary of Contents for AMR800

Page 1: ...H 95 2 x 58 5 x 34 6 mm Device Features Keyboard Specifications Model AKR920 Weight 350 20g Dimensions L x W x H 305 x 145 x 25 5 mm Connector Type RF 2 4GHz Device Features 1 LED Indicator Power On LED is on for 10 seconds Low Battery Blinks for 10 seconds and turns off after power on Flashes continuously during work and turns off after 10 seconds ...

Page 2: ...bottom of the mouse keyboard 2 Insert the batteries into the mouse and keyboard then follow the steps below 3 Replace the battery compartment cover 4 Plug the USB receiver into one of your computer s USB ports Now you are ready to use the devices Contents of the Box RF 2 4GHz Mouse x1 RF 2 4GHz Keyboard x1 AAA Battery x4 ...

Page 3: ...New Taipei City 221 Taiwan Please visit www acer com for warranty FCC Warning This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation NOTE 1 This equipment has been tested and found to comp...

Page 4: ...elocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help NOTE 2 Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s author...

Reviews: