OPERATING AND INSTALLATION INSTRUCTIONS FOR THE INS-ZSACC STANDALONE CODE
LOCK PLUS CARD AND KEY FOB READER
INS-ZS-ACC combines two autonomous devices INS-ZS and
INS-ACC in one panel. It is a microprocessor-based device that
integrates the features of a code lock and a proximity element
reader used to control one or more outputs. The exit can be
activated by using the right code or a proximity key fob/card
assigned to relevant output. The devices can be configured as
needed to work together to control a common output, it can also
be configured separately for up to four independent outputs. It
can directly control external devices such as an E-lock, reversible
E-lock (output 1 only) or an optional relay which can be used to
control any other device such as a magnetic e-lock, a barrier, etc.
1. INSTALLATION
The INS-ZSACC box is flush mounted. Lead the wires through hole
1
. Fix the box with expansion
bolts through holes
2,
when installing in soft materials, such polystyrene, fix the box using mounting
foam or plaster. Screw in the enclosure with 4 screws, using a size 3 Allen key.
The device can also be surface-mounted using a surface-mounted box to be purchased
separately (trade designation: INS-P-XS NT (INS-ZSACC)). Fix the surface-mounted box to the wall
with expansion bolts through four holes
2
. Lead the wires through hole
1
. Screw in the enclosure with
4 screws, using a size 3 Allen key.
