background image

Professional

ENGINEERING

Specifications are subject to change without notice. © 2016 All Rights Reserved

John F Kennedylaan 3, 5555XC, Valkenswaard, The Netherlands 

support@activ8all.com

version 2.5

CONNECT YOUR ACTIV8

Connect the Activ8 tracker to a PC using  

the USB adaptor. 

Note: the first time you connect it may take a minute 

before the window opens.

IMPORTANT

Make sure you are fully charged at all times.

Charging : red light is on. Fully charged: red light is off.

3

CHECK ACTIVITY LEVEL

Clients can check their activity level by turning the Activ8 

tracker up and down. The device will show progress 

towards the set daily target.

Note: disable the display completely by entering a target 

of 0 kcal.

It’s recommended to recharge the battery at least every 

3-4 weeks to secure measured activity data!

charge indicator

DOWNLOAD APPLICATION

The Activ8 Recording Tool only supports Windows OS.

Insert your Activ8 tracker in your PC and click the link 

on the drive, or manually insert the follwing link in your 

default browser:

https://www.activ8all.com/downloads/professional/activ8-pro-redirect.html

Download, store and unzip Activ8RecordingTool.exe. By 

default it will be stored in your Downloads folder. 

Discard the warning “not commonly downloaded and 

could be dangerous”.

1

START THE RECORDING TOOL

Click to install the Activ8 Recording Tool. The application 

can be trusted.

Click on ‘more info’ if the Windows protects your PC screen 

pops up and select run anyway. 

The Activ8 Recording tool is now ready for use.

2

RECORDING TOOL

Open, Save recording,  

Show Graph, Report, 

Start / Stop Recording

User Settings 

used for auto BMR calculation

Feedback Settings

Device LED’s on/off

Day Target in % / kcal

Measurement Settings

Interval: 1/5 minute(s)

Configuration: MET/Sec or 

Raw/Counts

Status bar 

stopped, not connected,  

measuring

4

Reviews: