background image

Thank You! We appreciate you for purchasing the new generation radio-controlled 
wireless weather station and atomic clock. This instrument is designed and engineered 
with state-of-the-art technology and components. It will provide these accurate and 
reliable measurements: date, time, barometric pressure, and indoor/outdoor tempera-
tures and humidity levels. A weather forecast component rounds out the features of this 
versatile weather clock.

1   CHECK PACKAGE CONTENTS

(1) Main Unit – 9.25” x 6” x 1”*
(1) Thermo. Hygro. remote sensor – 2.5” x 3.75” x 1”*
(1) 10’* wired low temperature adaptor
(2) 1” (2.5cm) screws with plastic anchors
(1) Instruction manual

00973 INST0511-06

Deluxe Wireless Weather Station

& Atomic Clock

Main Unit

Instruction Manual

MODEL # 00973 

CHANNEL

MIN/MAX

PRESSURE

ALARM

+  

-

 C/F

MON

TUE

WED

THU

FRI

SAT

SUN

0

-1

-2

-3

-6

-12

-.24 

-.18 

-.12 

-.06 

+.06 

+.12 

+.18 

+.24 

- 8 

- 6 

- 4 

- 2 

+2 

+4 

+6 

+8 

inHg/Hr 

Hr/hPa 

MOON

REMOTE

INDOOR

OUTDOOR

PRESSURE

FORECAST

MAIN UNIT

0

(zone)

2  READ

Please read this entire manual carefully before you set up the instrument and begin to 
use it. In this way you can become familiar with the features of the weather station & 
clock to get the most benefit from it.

9  PRODUCT SPECIFICATIONS 

 

 

 

MODEL#00593W

MEASUREMENT RANGE:

Indoor main unit   

0º C to + 50º C (+32º F to +122º F)

Outdoor/Indoor humidity  : 

20% - 99% RH

Wireless sensor   

-20º C to +70º C (-4º F to +158º F)

    with low-temp adaptor   : 

    -30º C to +70º C (-22ºF to +158º F) 

 

Barometer 

 

900 to 1050 mb/hPa

Channel  

 

maximum of three wireless sensors

Transmission  

 

up to 30M (100 ft.) open area, RF434 MHz

Resolution 

 

0.1º for temperature, 1% for humidity, 1 hPa mb for  

 

 

 

 

pressure

Clock 

 

 

:  

WWVB radio-controlled, quartz back-up  

Batteries 

 

AA x 2 alkaline for main unit; AA x 2 alkaline for  

 

 

 

 

wireless sensor

* dimensions approximate

Wireless Sensor

with low

temperature

adaptor

THERMO HYGRO 

Do not return product to retail store. For Technical Assistance and

product return information, please call Customer Care:

877-221-1252

HOURS: Monday through Friday from 8:00 a.m. to 4:45 pm CST.

Summary of Contents for 00973






Reviews: