background image

Introduction

This reference supplements the Security System Owner’s Manual (71-06633-000) with the Function List features for
the D9412/D7412. The instructions for the commands listed in this reference are intended to replace those instructions
in the Security System Owner’s Manual. Please refer to the Owner’s Manual for the operation of your new security
system and its other basic Function List features.

NOTE: This supplement should be placed inside the Security System Owner’s Manual.

Access Level Control ............................................................... 3

Door Control Command 46 ...................................................... 5

Cycle Door ........................................................................... 5
Unlock Door ......................................................................... 6
Secure Door ........................................................................  6

Delete User Command 53 ........................................................ 7

Add/Change User Command 56 .............................................. 9

System

Owner’s Manual

S u p p l e m e n t

Security

33267D   12/97

Summary of Contents for Security System D7412











Reviews: