Advanced Air UK Ltd
Burrell Way
Thetford
Norfolk IP24 3QU
Tel: 01842 765657
Email: Projects@advancedair.co.uk
2530 CE Series
Smoke Fire Damper
Due to continuous product development Advanced
(U.K.) Ltd reserves the right to change any
information without prior notice
Date
Issue
Sheet
Spec Number
April 2018
C
1 of 34
TS2530CE-01
G:\PRODUCTS\DMP - 2500 Series\05 Product Data\2530\Tech Sub\2530CE\TS2530CE-01 Technical Sub Rev C.docx
General Description
The model 2530 is designed to prevent the spread of fire and smoke through ventilation ductwork in walls and
floors. When the power to the damper actuator is removed, the actuator spring is released, which closes the
damper.
Advanced Air 2530 dampers are tested to BS EN 1366-2, BS EN15650 and BS ISO 10294-4. They are then classified
to BS EN 13501-3 so that the performance can be certified.
The damper is supplied complete with an actuator pre-wired with flying leads for electrical connection. A test
button is also included for checking the actuator operation. The dampers are supplied with long spigots for
installing access doors (optional).
