1 MIC-3038 Startup Manual
MIC-3038 Series
4U high 8-slot CompactPCI™ Enclosure
Startup Manual
Before you begin installing your card, please make sure
that the following materials have been shipped:
• One MIC-3038 CompactPCI™ enclosure with eight-slot
backplane
• One pair of rackmount bracket, and several screws
• One warranty certificate
• One startup Manual
• One CD disc and manual (in PDF format)
If any of these items are missing or damaged, contact
your distributor or sales representative immediately.
General
• Construction: Aluminum alloy and Nickel Plated
• Slots: Eight 4HP 6U CompactPCI™ slots (1x system
slot and 7x peripheral slots) Eight 80mm rear transition
slots IEEE 1101.11 compatible
• Hot swappable: Complies with PICMG 2.1 R 2.0 Hot
Swap Specification
• Dimensions (W x H x D, mounting flanges not
included): 441 x 177 x 342 mm (17.3" x 7" x 13.5")
• Weight: 13kg (28.6 lb)
• Operating temperature: 0 ~ 50° C (32 ~ 122° F)
• Storage temperature: -20° C ~ 80° C (-4 ~ 176° F)
• Relative humidity: 10 ~ 95% @ 40° C, non-condensing
• Operating altitude: 0 ~ 3,048 meters (0 ~ 10,000 feet)
• Storage/transit altitude: 0 ~ 12,190 meters (40,000
feet)
• Shock: 10 G (operating); 30 G (storage/transit)
• Random vibration: 5 ~ 500 MHz 1.0 Grms (operating)
2.0 Grms (Non-operating)
For more information on the MIC-3038 and other Advan-
tech products, please visit our website at:
http://www.advantech.com
For technical support and service, please visit our support
website at:
http://support.advantech.com
This manual is for the MIC-3038 series Rev. A1.
Part No. 2002303810 1st. Edition
Printed in Taiwan October 2002
Fans
• Air flow: One 163-CFM fan (side), and one 43-CFM fan
(rear)
• Power consumption: 0.45 A @ 12 V, 0.09 A @ 12V
• Rated fan speed: 2,170 (side) /4,500 (rear) rpm
• Life expectancy: 50,000 hours @ 25° C
Power Supply
• Total Power: Redundant 300W ATX with PFC
• Input: 100~240 V AC @ 50~60 Hz, auto switchable
• Output: +3.3 V @ 20 A, +5 V @ 32 A, +12 V @ 16 A, -
12 V @ 0.8 A
• Minimum load: +3.3 V @ 1.0 A, + 5V @ 3 A, +12 V @
2.0 A
• Max output: 280 W for +5V, +3.3 V and +12 V, 35A for
+5 V and +3.3 V
• MTBF: 100,000 hours @ 70% load
• Safety: UL/CUL/CE/FCC
We have carefully inspected the MIC-3038 before ship-
ping. It should be free of marks and scratches, and in per-
fect working order upon receipt. As you unpack the MIC-
3038, check for signs of shipping damages (damaged
box, scratches, dents, etc.). If it is damaged or fails to
meet specifications, notify our service department or your
local representative immediately. Also notify the carrier.
Retain the shipping carton and packing material for
inspection by the carrier. We will make arrangements to
repair or replace the unit upon inspection, .
Warning! We strongly recommend that only qualified,
experienced personnel install or remove compo-
nents. They must exercise extreme caution
when doing the MIC-3038 illustration. The MIC-
3038 is designed to be installed and maintained
easily. Figure-1 and Figure-2 illustrate important
components on the front and rear side of the
enclosure
Before Operating the System
Before operating your system, first check your power sup-
ply source. The power supply module included in the MIC-
3038 chassis accepts a full input range of 100~240 V AC
without any switch setting. Two mounting flanges are
included for users who would like to install the MIC-3038
on a 19" rack.
Packing List
Specifications
Initial Inspection
MIC-3038 Series
4U high 8-slot CompactPCI™
Enclosure
