A105NAPPX & AL105NAPPX APPELLO
Alarm Tone and Voice Annunciation Sounder
1) Introduction
The Appello tone and speech annunciation
sounder has three different styles in AC and DC.
•
A105NAPPX Sounder
•
AL105NAPP Sounder-Beacon Combination
Sounder-Beacon Combination units are
available as either a high output LED or
Xenon strobe.
These Sounder units share a common set of
functions:-
•
4 stages, each stage can record up to 30
seconds of CD quality audio.
•
Facility to record via an on board microphone
or a line in input.
•
The recorded message can be played back
proceeded either with or without the choice
of one of forty five tones.
The Beacon functions are either:-
•
Xenon Strobe - 1Hz flash rate
•
LED - Either Steady or 2Hz blink rate
2) Operating and Marking
All
units
have
the
following
operating
requirements and limitations.
Unit Type No. Voltage Range Current
Sounder only outputs
A105NAPPX DC 24Vdc 10-30Vdc 256mA
Max Current 256mA @ 30Vdc
A105NAPPX AC 115Vac 90-260Vac 112mA
230Vac 90-260Vac 124mA
Max Current 127mA @ 260Vac
AL105NAPPX combined unit - Add selected
sounder & beacon currents to calculate total
current required.
Beacon only outputs
LED Beacon DC 24Vdc 10-30Vdc 157mA
Max Current 166mA @ 30Vdc
LED Beacon AC 115Vac 90-260Vac 60mA
230Vac 90-260Vac 35mA
Max Current 60mA @ 90Vac
Xenon Beacon DC 12Vdc 10-14Vdc 500mA
24Vdc 20-28Vdc 250mA
Xenon Beacon AC /-10%Vac 100mA
230Vac +/-10%Vac 50mA
Operating Temp: -20 to +55
°
C
IP Rating:
Type 4 / 4X / 3R / 13 , IP66
Marking:
3) Installation & Wiring Requirements
A105NAPPX
AL105NAPPX
INSTRUCTION MANUAL
ϭϬϱEyͲĨĂĐƚŽƌLJƌĞĨ
W>KϱͲĐŽŵŵĞƌĐŝĂůƌĞĨ
ae&t - 4 impasse Joliot Curie - 64110 Jurançon - tél 05 59 06 06 00 - info@aet.fr - aet.fr
