Indicator light reference ON OFF FLASHING.
- 2 -
4 PAIR TEST
PASS = YELLOW x 4 (ON)
FAIL = RED (ON)
Yellow (OFF) or
(FLASHING)
TEST RESULTS:
1 2 3 4 5 6 7 8
SH
PR3 PR1
PR2
PR4
EIA/TIA-568A
1 & 2
3 & 6
SHIELD
7 & 8
4 & 5
OPEN
SHORT
SPLIT
CROSS
4 PAIR + SHIELD TEST
PASS = YELLOW x 5 (ON)
FAIL = RED (ON)
Yellow (OFF) or
(FLASHING)
1 2 3 4 5 6 7 8
SH
PR3 PR1
PR2
PR4
EIA/TIA-568A
1 & 2
3 & 6
SHIELD
7 & 8
4 & 5
OPEN
SHORT
SPLIT
CROSS
2 PAIR TEST (1-2 AND 3-6)
PASS = YELLOW x 2 (ON)
FAIL = RED (ON)
Yellow (OFF) or
(FLASHING)
1 2 3 4 5 6 7 8
SH
PR1
PR2
10BASE-T
1 & 2
3 & 6
SHIELD
7 & 8
4 & 5
OPEN
SHORT
SPLIT
CROSS
4 PAIR TEST
PASS = YELLOW x 4 (ON)
FAIL = RED (ON)
Yellow (OFF) or
(FLASHING)
1 2 3 4 5 6 7 8
SH
PR2 PR1
PR3
PR4
EIA/TIA-568B
(AT&T-258A)
1 & 2
3 & 6
SHIELD
7 & 8
4 & 5
OPEN
SHORT
SPLIT
CROSS
- 1 -
Connect the main unit to one end of the cable under test and the
remote unit to the other end of the cable under test. Press the Test
button on the main unit to turn it on. If the cable is terminated to wall
sockets or equipment racks, use patch cords to connect the main and
remote units.
Faults displayed by LED indicators.
FEATURES:
WARNING. DO NOT USE ON LIVE CIRCUITS!
Congratulations on the purchase of your new LAN cable tester. This tester
consists of a main unit and a remote unit. The tester will automatically test
for:
Continuity, Opens, Shorts, Crosses, and Splits.
Auto scanning
enables fast cable testing.
Remove terminator unit.
Connect one end of cable to be
tested to the main unit and the
other to the terminator unit.
User's Guide
CZ20250
