background image

DO NOT RETURN TO RESELLER!

Contact Us FIRST: help.afwfilters.com

For any questions, concerns, missing items, or problems contact us so 

we can help. Resellers do not offer support or replacement parts.

STOP

STOP

Installation Instructions for Water Softeners

Includes Fleck 5600 and 2510 series valves

Thank You

Thank you for purchasing a new AFWFilters® Water Softener. We appreciate the opportunity 
you have given us to provide you with better water. We are committed to providing the best 
customer experience possible and have provided these installation instructions to make things 
as simple as possible. If you have read through the instructions and FAQ section entirely and 
still have questions, feel free to contact us for further help. 

How To Use These Instructions

Since every installation is different we are unable 
to address every possible situation that may arise. 
That being said, these instructions are designed 
as a general guideline for installation of your new 
system. Installation will require a basic knowledge 
of plumbing and plumbing connections. Pictures are 
included to help identify common parts, compo-
nents, and connections, so what you have may vary 
slightly from what is pictured. Please apply these 
instructions with discretion and common sense.

For Questions or Troubleshooting

Most questions that arise are answered in this manual or the FAQ section at the end. If you 

have read through this manual and the FAQ section and still have a question that has not 

been answered, feel free to use the AFWFilters website to contact us.

Page 1

This offers vital information 

that can have major impact on 

your system/install/experience

Tips, tricks, and recommenda-

tions will be shown here

Answers to common questions - 

A complete FAQ is at the end of this 

manual

Summary of Contents for 2510 Series

























Reviews: