VM936R Aidapt Lift Assist Cushion
VM936R Usage and Maintenance Instructions
INTRODUCTION
Thank you for deciding to purchase the Lift Assist Cushion from Aidapt.
NB. A RISK ASSESSMENT SHOULD BE UNDERTAKEN AS TO THE SUITABILITY OF THE PRODUCT FOR
THE PARTICULAR USAGE.
NB. THIS EQUIPMENT MUST BE INSTALLED BY A COMPETENT PERSON
Maximum User Weight Limit 127kg (20 Stone)
Do not exceed the stated weight limit – doing so could put the user at risk.
BEFORE USE
Carefully remove all packaging. Avoid using any knives of other sharp instruments as this may
damage the surface of the product.
Check the product for any visible damage if you see any damage or suspect a fault, do not use your
product, but contact your supplier for support.
INTENDED USE
This Lift Assist Cushion from Aidapt is designed to be used to help gently raise the user in and
out a chair or sofa.
ADJUSTING THE GAS LIFTING MECHANISM
Turn the cushion on its side and reach underneath the rear of the cushion. You will see a bar that
runs three quarters of the length of the base. Pull back on the widest part of the bar connected to
the lifting mechanism so that it releases from the resistance grooves. (See Fig 1).
