background image

þ
þ
þ

energy

bulbs

.co.uk

Mon-Fri:

 8:30am - 6:30pm  

|  Sat & Sun:

 11am - 5pm

08

00 0

43 8

97

8

or 0121 250 2180

Quick 

O

rder Hotline

G

uaranteed Low Prices

Huge Stock Available

Airflow Stockist

Installation and Operating Instructions

QuietAir 100/120mm Axial Fan 

MODEL:QT 100T - Two Speed Fan (75/90m

3

/hr)

QT 120T - Two Speed Fan (150/170m

3

/hr) 

with Delay Start, and Adjustable
Timer control  

• Low Energy

• Whisper Quiet

• Long Life

• Extra Safe

• Delay Start

• Auto Refresh Intervals

Warranty:

Applicable to units installed and used in the United Kingdom. Airflow’s Warranty covers the QuietAir fan for TWO years. The Warranty can be upgraded to THREE years from date of
purchase against faulty material or workmanship by registering on our web site at www.airflow.com.
The Warranty covers the product only and not the installation cost..

In the event of any defective parts being found, Airflow Developments Ltd reserve the right to repair or at our discretion replace without charge provided that the unit

1. Has been installed and used in accordance with the fitting and wiring instructions supplied with each unit
2. Has not been connected to an unsuitable electrical supply
3. Has not been subjected to issue, neglect or damage.
4. Has not been modified or repaired by any person not authorised by Airflow Developments Ltd.
5. Has been installed in accordance with latest Building Regulations and IEE wiring regulations.

Airflow Developments shall not be liable for any loss, injury or other consequential damage, in the event of a failure of the equipment or arising from, or in connection with, the
equipment excepting only that nothing in this condition shall be construed as to exclude or restrict liability for negligence.

This warranty does not in any way affect any statutory or other consumer rights.

Airflow Developments Limited

Aidelle House, Lancaster Road, Cressex Business Park
High Wycombe, Buckinghamshire
HP12 3QP, United Kingdom

E-mail: info@airflow.co.uk

Telephone: +44 (0) 1494 525252
Facsimile:  +44 (0) 1494 461073

airflow.com

9041551 Issue 1 0

1

/

13

9041551_Model_QT_100_120T  30/06/2010  11:29  Page 1

energybulbs

.co.uk

energybulbs

.co.uk

Summary of Contents for QT 100T








Reviews: