background image

SCHLAGE CYLINDER ASSEMBLY ADDENDUM  

FOR REGAL CURVED LEVER (75) TRILOGY MODELS ONLY 

KNURLED NUT 

SPACER 

P/N HW830

 

CYLINDER

 

CYLINDER 

(Not supplied with lock)

 

TAIL PIECE 

P/N HW580 

(Supplied with lock)

 

KNURLED NUT 

(Not supplied with lock)

 

SPACER 

P/N HW830 

(Supplied with lock)

 

ASSEMBLY PROCEDURE: 

 

1.  REMOVE ORIGINAL TAIL PIECE: DEPRESS THE SPRING LOADED LOCKING PIN AND 

UNSCREW THE KNURLED NUT. 

2.  

PLACE SPACER (PROVIDED) ON CYLINDER, AS SHOWN. 

3.  PLACE TAIL PIECE IN VERTICAL POSITION (AS SHOWN). 
4.  ASSEMBLE THE KNURLED NUT: DEPRESS THE SPRING LOADED LOCKING PIN, THEN 

SCREW BACK ON THE KNURLED NUT. 

5.  CHECK FOR PROPER CLEREANCE FOR ROTATION OF THE CYLINDER AND MAKE 

SURE THAT THE SPRING LOADED PIN IS LOCKED WITH THE NUT. 

WI1037A 03/01

 

TAIL PIECE 

P/N HW580 

 

SPRING LOADED LOCKING PIN 

 

Reviews: