background image

Arctic Oven 10 X 20 Instructions                                                                 www.alaskatent.com 

November 5, 2003                        Page 1 of 9 

 
 
 
 
 

 
 
 
 

 

 

 

 

 

 

 

 

 
 
 
 
 
 
 

Packaging:

 

 

Your Arctic Oven 10x20 comes disassembled in a large, nylon drawstring storage bag. 

The storage bag includes one (1) nylon tent fly, one (1) nylon/polypropylene tent body, one (1) 
small nylon stake bag, and one (1) medium sized nylon pole bag. The pole bag includes eight (8) 
“end poles”, two (2) “center poles”, two (2) “ridge poles”,  and one (1) “center pole” with 
attached carabineer. 
 
 

Parts and Pieces:

 

 

Before assembling you’re Arctic Oven 10x20, it’s important to identify the parts and 

pieces. Fabric pieces first. The smaller of the two fabric bundles is the tent fly. Solid yellow in 
color, the one-piece, nylon tent fly includes two zippered doors, two vent tubes, and one gray 
stove jack with attached cover. The larger fabric bundle is the tent body. The one-piece tent body 
also includes two zippered doors, two vent tubes, and one gray stove jack (no flap). Additionally, 
the tent body includes two attached, five-legged “end spiders”. 
 
 

Inside the pole bag you will find thirteen (13) frame components. There are eight (8) 

identical “end poles”. “End poles” are comprised of five shock-corded, aluminum sections and a 
small J-bolt. Two (2) “center poles” are included. Slightly shorter than the “end poles”, “center 
poles” are also comprised of five shock-corded, aluminum sections and a small J-bolt. There are 
two (2) “ridge poles” identical 54” straight sections of aluminum tubing. Lastly, the “center 
spider” is a simple, four-legged steel component with an attached carabiner. 
 
 

Site Preparation:

 

 

Before erecting your tent, locate and properly prepare your tent site. Find a site 

significantly larger that the size of your tent – the more room you have, the easier it will be to 
erect your tent. Choose a firm, level tent site free of roots and shrubs. Remove any objects that 
may wear or, in any way, damage your tent floor. And, for safety’s sake always choose a site 
shielded from direct winds. 
 
 

Setup:

 

 

The Arctic Oven 10x20 is a large, multi-piece tent. Setup is best accomplished with two 

or more people – especially in adverse conditions. Do not attempt to setup an Arctic Oven 10x20 
alone; damage to the tent or personal injury may occur. 

ALASKA FABRICS, INC. 

D/B/A

 

 

 

 

FAIRBANKS

 

529 FRONT STREET  
FAIRBANKS, AK 99701 
PHONE (907) 456-6328 
FAX       (907) 452-5260 
1-800-478-8368 (Within Alaska) 

ANCHORAGE 

100 E. INTERNATIONAL AIRPORT RD 

ANCHORAGE, AK 99518 

PHONE (907) 562-2293 

FAX (907) 562-8368 

 

 

ARCTIC OVEN 10x20 

SET-UP 

INSTRUCTIONS

 

Summary of Contents for ARCTIC OVEN ARKTIKA










Reviews: