background image

Product Description                                                                           

ALDES North America Ventergy® Series IAQ-FSVS Filtering Supply Ventilator Kits are the best way to supply constant, 

precisely regulated amounts of fresh air to central forced air (heating/cooling) systems in homes. Compared to using a 

motorized damper, the IAQ-FSVS constantly and efficiently provides fresh air to the at a precisely regulated low volume. 

Motorized dampers only provide high volumes of fresh air when the forced air system is running. The IAQ-FSVS is the 

superior solution for better indoor air quality, comfort, and energy efficiency.

VENTERGY

®

 IAQ-FSVS

RESIDENTIAL SYSTEM  
SOLUTIONS

FILTERING SUPPLY VENTILATOR  

ACCESSORY KITS CONTINUOUS SUPPLY

©2020 American ALDES Ventilation Corporation. VentergySeries_IAQ-FSVS_KIT_IOM_1020. Aldes reserves the right to modify its products at any time to introduce new technologies.

 

For more information, contact your Aldes sales advisor, visit aldes-na.com, call 1.800.255.7749, or find us on

Description

6” MR Modulo

(CFM)

Variable 

Speed 

Controller

6” Wall 

Hood**

RECOMMENDED FAN

Sold separately

ENERGY STAR Certified* Ventilator

Manual Flow Control

--

1

1

FSVS140

Automatic Flow Control

60-140  

(100-240 m3/h)

1

FSVS140

IOM

Summary of Contents for Ventergy IAQ-FSVS















Reviews: