background image

BTS-24(B)

PROGRAMMEREN

•  De programma-ring in de pijlrichting  
  draaien totdat de aktuele tijd bij de  
 markerings-driehoek 

staat.

•  De schakelklok in het stopkontakt
  steken en de stekker van het te    
  schakelen apparaat in de schakelklok  
  steken. Het aangesloten apparaat  
 inschakelen.
•  Ingedrukte ruitertjes schakelen het  
  apparaat in; niet ingedrukte ruitertjes  
  schakelen het apparaat uit.
•  Voor de duur van de AAN periode,  
  alle ruitertjes indrukken.
•  Gebruik de schakelknop rechts op de  
  schakelklok om het apparaat buiten  
  de time om in of uit te schakelen

HOW TO PROGRAM

•  Turn the program ring clockwise until  
  the actual time is at the marking
 arrow.
•  Insert the BTS-24(B) into a mains  
  outlet and connect the appliance to  
  be switched into the timer. Switch the  
  power of the electric device to ON.
•  Depress the switching keys to switch- 
  ON the device, release the switching  
  keys to switch-OFF the device.
•  For the ON period, all switching keys  
  must be pressed down.
•  Use the switch on the right side of the  
  timer to manually switch the device.

PROGRAMMATION

•  Tourner l’anneau de programmation  
  dans le sens de la fl êche jusqu’ à ce  
  que l’heure coincide avec le triangle  
 de 

repère.

•  Brancher l’interupteur horaire dans la  
  prise de courant et enfi cher l’appareil  
  à commander dans la prise du
  commutateur horaire. Et mettre en  
  route l’appareil électrique commandé.
•  Pour la marche, presser sur les
  segments de commutation, ne pas  
  presser pour l’arrêt.
•  Pendant la durée de marche, tous les  
  segments s’y rapportant doivent être  
 baissés.
•  Utilisez le commutateur de la
 BTS-24(B) 

afi n de brancher l’appareil  

  sans utilisation de la minuterie.

PROGRAMMIEREN

•  Den Programmring in Pfeilrichtung  
  drehen bis die aufgedrückte Zeit am  
  Markierungsdreieck mit der
 momentanen 

Tageszeit

 übereinstimmt.
•  Die Zeitschaltuhr in die Steckdose  
  stecken und den Stecker des zu    
  schaltenden Gerätes in die  

 

  Zeitschaltuhr stecken. Schalten Sie  
  das angeschlossene Elektrogerät ein.
•  Gedrückte Schalttasten schalten ein,  
  nicht gedrückte schalten aus.
•  Für die Dauer der Einschaltzeit alle  
  zugehörigen Schalttasten nach unten  
 drücken.
•  Verwenden Sie die extra Schalter um  
  das Gerät manual ein zu schalten.

Reviews: