background image

Uses

Light and self collapsing grease

Discharge Quantity

Once loaded, approximately 30 shots – up to 1.25 grams of grease per shot

Size

2.5kg grease pails

Pressures

Up to 10,000psi

Important Please Note

The 6336N 2.5kg grease kit is designed for use with most greases, however,  

trouble free greasing is assured with the use of greases up to No. 2 consistency.  

That is, the kit is recommended for use with light and self collapsing greases.

Preparing Your 6336N 2.5kg Grease Kit

1   Remove follower plate from the pump tube.
2   Insert follower plate into the grease container as shown with boss facing upwards.  

Push down firmly onto the grease until grease emerges through the boss.

3   Push the pump tube through the boss and down until the drum cover sits firmly on rim of 

grease container. Hand tighten the 3 thumbscrews evenly under rim of the container.

4   To achieve initial prime, push rod cap down several times by using your hand  

or foot to start grease flowing through the grease hose. When the hose is full  

of grease, the rod cap will stay down.

5   Squeeze gun handle and hold handle closed to bleed air out of the system.  

When fully bled, grease from out of the 2.5kg drum will appear at the coupler.

Note:

 

Grease must travel through entire length of hose to accomplish full bleeding 

and it may be necessary to repeat Step 4 a couple of times. If unit fails to prime, 

bump container base several times on a solid surface to settle the grease.

Important Please Note

The 6336N 2.5kg grease kit is now ready for operation. 
While greasing, the rod cap will rise slowly. When it is fully up and the hand piece loses 

pressure, push the rod cap down once or twice to reprime the system and to enable you to 

continue greasing. Each pump prime will provide sufficient grease for up to 30 grease shots.  

The hand piece is normally operated on the hi-volume switch position. Should high pressure be  

required to help clear a blocked or seized lube point, simply move the button on the hi-pressure position.

 2.5 Kg grease drums

1  Unscrew the 3 thumbscrews. 

2  Remove the 6336N from the container. 

3  Remove follower plate from the empty 2.5kg grease drum and repeat preparation steps 2, 3 and 4.
Before operating your 6336N 2.5kg grease kit, bleed any trapped air from the unit.
To remove trapped air: (Point gun in direction of an empty receptacle) 

1  Push pump plunger down a few times to start the grease flowing through the grease hose. 

2  Squeeze and hold gun handle in to automatically remove trapped air –repeat 1 and 2 until all air is removed.
How to clean the strainer
Should the strainer need cleaning, (refer trouble shooting guide, page 3, item C(b)),undo the nut at the base of the pump 

spring with a suitable spanner, remove assembly, lever off strainer cover and clean the appropriate parts as illustrated.

Description

The 6336N 2.5kg grease kit is a manually operated, spring powered grease kit with ergonomic, user friendly rod cap that comes 

complete with a hand piece. It is designed to fit a 2.5kg grease pail. The hand piece for the 6336N, once loaded, is capable of 

approximately 30 high pressure shots before needing to be reprimed. The high pressure/high volume option facilitates quick and easy 

greasing with grease pressures of 10,000psi and dispensing quantities of up to 1.25 grams per stroke possible. Suitable for use with 

greases up to NLGI2, the light weight, rugged and portable unit makes light work of arduous greasing applications. The 6336N is the 

ideal greasing tool for people looking to minimise the time and effort required to grease their vehicles or machinery.

Visit our website at  

www.alemlube.com.au

     Email - info@alemlube.com.au

NSW/ACT
TEL: (02) 9677 1555
FAX: (02) 9675 1155

QLD/PNG
TEL: (07) 3204 9166
FAX: (07) 3204 1224

VIC/TAS
TEL: (03) 8787 8288
FAX: (03) 8787 8266

WA
TEL: (08) 9302 4199
FAX: (08) 9303 2095

SA/NT
TEL: (08) 8241 7111
FAX: (08) 8241 7011

NZ
TEL: (09) 447 1007
FAX: (09) 447 1008

6336N 2.5kg Grease Kit

6336N

OWNER’S TECHNICAL MANUAL

Specifications

Summary of Contents for 6336N







Reviews: