Description
The 61114 1/2” air impact wrench is a powerful, heavy duty and convenient tool with a twin hammer mechanism providing
instantaneous and lasting high torque. Ideal for automotive workshops, tyre workshops, industrial and diesel engine work
applications, the 61114 features a twist control knob for the simple and easy choice of speed and direction, stable and smooth torque
during operation and an ergonomically designed handle with inbuilt exhaust reduces noise levels. Robust and reliable, the 61114 1/2”
impact wrench is a great performer and a valuable addition to any busy workshop.
Specifications
Warning
1. This tool cannot be used in explosive atmospheres unless specially designed
for that purpose.
2. The tool is not electrically insulated. Do not use where there is a possibility
of coming in contact with live electricity.
3. Unexpected tool movement due to forces or breakages may cause injuries.
4. It is preferably to shut off the air supply before changing the socket or at least
ensure that hands are well clear of the operating trigger.
5. Be aware of the risk of crushing by torque between a reaction bar and the work area.
6. When loosening fasteners first ensure that there is a sufficient clearance behind the tool to
avoid a hand being caught. The tool will move away from the threaded joint as the nut/bolt
etc is loosened and rides up the thread moving the tool with it.
7. There is a risk of being injured especially when unscrewing in a confined work place if hands
are not kept away from the reaction bar. Keep hands away from the nut runner socket.
8. In case of nut runner socket failure, beware of high speed splinters being emitted from the
impact wrench.
9. Be aware of a whipping compressed air hose line.
10. Always ensure that the reverse valve is in the correct position before operating the tool. Do
not run the tool unless the socket is first located on the joint.
11. Prevent loose clothes, long hair, or any other personal accessories from catching on any
moving parts to reduce the risk of being caught, trapped or drawn into the rotating spindle.
Product Use
½” Professional Pistol Grip Impact Wrench
Pin Clutch
Twin Hammer type
RPM
10,000 RPM ± 10%
Weight
2kgs / 4.44lbs
Noise Level
Sound pressure level: 93.1 db(A) Sound power level: 104.7 db(A) Tested in ac-
cordance with EN ISO 15744
Recommended Minimum Hose Bore Diameter
10mm / 3/8”
Recommended Maximum Hose Length
10m / 30ft
Air Pressure
Working: 90 psi / 6.3 bar Maximum: 100 psi / 7.0 bar
Vibration Level
5.7m/sec2 Tested in accordance with EN 28662-1 and EN 28662-7
Recommended Personal Safety Equipment
Safety Glasses and Ear Protectors
Air Inlet
¼” NPT
Bolt Capacity
16mm / 5/8”
Torque
1000ft lb / 138kg/m / 1350Nm. Reverse torque: 750ft lb / 1000Nm
Average Air Consumption
13 cfm / 0.37m3/min
Overall Length
193mm / 7.6”
Square Drive
½”
Materials
High strength lightweight patented design of composite & aluminium alloy
components. Contoured elastomer handle grip.
Visit our website at
www.alemlube.com.au
Email - info@alemlube.com.au
½” Impact Wrench
6III4
NSW
TEL: (02) 9939 0711
FAX: (02) 9939 0411
QLD/PNG
TEL: (07) 3889 8480
FAX: (07) 3889 8490
VIC/TAS
TEL: (03) 8787 8288
FAX: (03) 8787 8266
WA
TEL: (08) 9209 3066
FAX: (08) 9209 3933
SA/NT
TEL: (08) 8241 7111
FAX: (08) 8241 7011
NZ
TEL: (09) 447 1007
FAX: (09) 447 1008
OWNER’S MANUAL
