Description
The Alemlube EL Series G10040N 18V Lithium-ion cordless grease gun takes the hard work out of greasing.
A must for any busy workshop, the Alemlube EL Series G10040N can dispense up to twelve 450 gram cartridges of
grease using the 3000 mAh battery before recharging or battery changeover.
It is advisable not to recharge the 1500 mAh battery for longer than 75 minutes, or the 3000 mAh battery for longer
than 150 minutes, otherwise damage to the battery and /or charger may occur.
Weighing in at 4kg, the Alemlube EL Series G10040N features a 106cm long grease gun flex, a heavy duty coupler
and can work continuously for 25 minutes.
The Alemlube EL Series G10040N 18V Lithium-ion cordless grease gun goes anywhere, securely contained in the
convenient carry case, delivering high volume, high pressure trouble-free greasing.
EL SERIES
OWNER’S TECHNICAL MANUAL
G10040N
18V Lithium-ion Cordless Grease Gun
Visit our website at
www.alemlube.com.au
Email - info@alemlube.com.au
NSW
TEL: (02) 9939 0711
FAX: (02) 9939 0411
QLD/PNG
TEL: (07) 3204 9166
FAX: (07) 3204 1224
VIC/TAS
TEL: (03) 8787 8288
FAX: (03) 8787 8266
WA
TEL: (08) 9209 3066
FAX: (08) 9209 3933
SA/NT
TEL: (08) 8241 7111
FAX: (08) 8241 7011
NZ
TEL: (09) 447 1007
FAX: (09) 447 1008
10
12
11
9
8
7
6
5
4
3
2
1
PRODUCT SPECIFICATIONS
Charger Input Power
230~240 Vac/60HZ
Battery Output Power
18Vdc
Battery Capacity
1500 mAh / 3000 mAh
Battery Charge Time
1500 /75min 3000 /150min
Maximum Operating Pressure 10,000±1000PSI
Grease Reservoir Capacity
450 grams
Maximum Flow rate (g/minute) 90±10
Hose Pressure rating
18,000 PSI
Weight 4kg
SAFETY INSTRUCTIONS
Failure to follow all instructions listed below may result in electric shock,
fire, and / or serious injury. Please read carefully.
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dull
areas may cause accidents.
2. Do not operate power tools in explosive atmospheres such as in
the presence of flammable liquids, gases, or dust. Power tools
create sparks that may ignite the materials.
3. Keep bystanders, children, and visitors away while operating a
power tool. Distractions can lead you to lose control.
ELECTRICAL SAFETY
1. Avoid body contact with grounded surfaces such as pipes
& couplers. There is an increased risk of electric shock if
your body is grounded.
2. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk
of electric shock.
