background image

Visit our website at  

www.alemlube.com.au

 or 

www.alemlube.co.nz

NSW/ACT
TEL: (02) 9677 1555
FAX: (02) 9675 1155

QLD/PNG
TEL: (07) 3204 9166
FAX: (07) 3204 1224

VIC/TAS
TEL: (03) 8787 8288
FAX: (03) 8787 8266

WA
TEL: (08) 9302 4199
FAX: (08) 9303 2095

SA/NT
TEL: (08) 8241 7111
FAX: (08) 8241 7011

NZ
TEL: (09) 447 1007
FAX: (09) 447 1008

1

Description

The new SP610 Propane hose reel from Alemlube is a genuine industrial quality welding reel ideal for all general welding 

applications undertaken by contractors, fabricators and people involved in the construction and industrial fields. Featuring impact 

resistant UV stabilised covers for maximum durability and an automatic and positive latching mechanism, the SP610 can easily  

be mounted on the wall or ceiling and can be carried in utes and service vehicles.
 

 

Specifications

Uses

Propane welding

Hose Length

20m x 6mm ID rubber hose and 0.9 lead in hose

Materials

Plastic UV stabilised cover & steel spring

Pressure

300 psi (20 bar)

Dimensions

630mm (L) x 442mm (H) x 261mm (W)

  Inlet/Outlet

  Lead in hose: 5/8

"

 UNF (f) fitting

  Working Temp

  -30°C 

~

 60°C 

Propane Hose Reel

OWNER’S TECHNICAL MANUAL

SP610

April 2019

Safety Precautions
General Safety Rules

       WARNING:

 Read and understand all instructions.

        WARNING:

 The warnings, cautions, and instructions discussed 

in this instruction manual cannot cover all possible conditions 

or situations that could occur. It must be understood by the 

operator that common sense and caution are factors which cannot  

be built into this product, but must be supplied by the operator.

Hose Reel Safety Precautions

1  

Use proper eye protection when assembling and using the hose reel.

2  

Keep children away from the work area.

3  

Personal injury and/or equipment damage may result if proper safety 

precautions are not observed.

4  

Ensure that reel is properly installed before connecting input  

and output hoses.

5  

Bleed fluid/gas pressure from system before servicing reel.

6  

Before connecting reel to supply line ensure that pressure  

does not exceed maximum working pressure rating of reel.

7  

Remember, even low pressure is very dangerous  

and can cause personal injury or death.

8  

If a leak occurs in the hose or reel, remove system  

pressure immediately.

9  

Ensure that reel, hose, and equipment being service  

are properly grounded.

10  If reel ceases to unwind or rewind, remove system  

pressure immediately.

11  Do not pull or jerk on hose.

        WARNING:

 Exposure of skin directly to pressurized air,  

or fluids could result in severe bodily injury.

Reviews: