KC-9512/P-25 Digital FM Transmitter with Auto Power
Adaptor
Instruction Manual
FM Transmitter with Car Adapter is designed for the iPod/mini iPod/iPod Photo/iPod nano/iPod Video consoles
to use on the road. The Car Adapter not only charges your iPod, but also broadcast music through the FM radio
channels in automobile. FM Transmitter can memorize the channel for easier search. It enables iPod playing
music without earphone and let everyone inside automobile could share the joy of listening hot songs together.
Features
1.
Listening and Charging iPod at the same time
2.
Safe placement to your iPod by 6 plates for different models of iPod.
3.
Car Adaptor can move up and down with 5 different angles for large extent of flexibility
4.
The clear blue bar
5.
Lcd display the frequency
6.
Easy Operation by Up and Down buttons to select radio frequency
7.
Digital frequency selection allows stable and clear broadcast of the FM Transmitter
8.
LED lights up on the top of Car Adapter for indication of connection
9.
Memorize your channel, keep away interference from other FM signals
Operation
1.
Turn off iPod console before connecting FM Transmitter with Car Adapter
2.
Select the appropriate tray (shown under the tray) to match up with your corresponding iPod console.
3.
Plug the Car Adapter into the cigarette socket of your car, the LED on the top of Car Adapter will then
light on and the FM transmitter will then display the channel
4.
Plug the power cable into the iPod console which will indicates charging status if connected properly
5.
Turn on the iPod
6.
Press the Up or Down button of FM transmitter to select the frequency
7.
Make sure to match the FM Transmitter with your car radio on the same frequency, and then car
’
s FM
stereo could broadcast the music of iPod if succeed.
8.
Pressing MEM(M) button to memorize the desired radio channel
9.
Turn off iPod before unplug FM transmitter with Car Adapter or when not in use
10. Store and overwrite the channel:
l
Choose the desired frequency by pressing UP or Down button
l
Press the MEM continuously until the
“
M
”
appears on the screen and the unit of frequency
flashes below.
l
When the unit of frequency flashes 3 times, it represents for success of storage. Release the
button and select the other desired frequency.
