Quick Start Guide
In the box, you should have:
A. The SkeinMinder
B. Power Cord
C. Rotation Counter (cabled)
D. Screw Eye
E. Magnet
F. Cable Guides (4)
1
Unpack your SkeinMinder
A
B
C
D
E
F
A. Find a good spot to attach the rotation
counter and magnet. The rotation
counter goes on the fixed base of your
winder, and the magnet goes on the
moving arms, hub, or drive wheel. They
need to be 1/8” - 1/4” apart, and the
magnet should pass directly in front of
the counter.
B. Make a note of where the counter will
attach to the base, and where the magnet
will sit on the arm, hub, or drive wheel.
If you already have a rotation counter on
your winder, you may be able to position
the SkeinMinder counter to use the existing
magnet.
Scope Out your Winder
2
