Step 1:
Install the (2) DIN Rail Mounting Brackets onto
the (4) threaded posts as shown. Then secure
using the (4) serrated nuts included in the kit.
Step 2:
The (2) 35mm DIN Rails can now be attached to
any of the 18 locations in the DIN Rail Mounting
Brackets using the supplied (4) screws as shown.
Altelix LLC USA: 866-660-WIFI (9434) International: +1 561-660-9434 sales@altelix.com www.altelix.com
Copyright (C) 2017 Altelix LLC. All rights reserved. Altelix and the Altelix logo are Trademarks and/or Registered Trademarks of Altelix LLC.
Specifications are subject to change without notice. See
www.altelix.com
for most current information
WARNING: READ ALL INSTRUCTION BEFORE USE. THIS ENCLOSURE IS DESIGNED TO BE
INSTALLED BY A TRAINED PROFESSIONAL INSTALLER.
DIN Rail Mounting Brackets
Mounting:
For wall mounting (4) 5/16” (8mm) diameter holes
are provided on the rear of the enclosure.
Mounting Holes
For pole mounting, the optional
NMKS
&
NMKX
Series
pole mount kits are available from Altelix.
35mm DIN Rails
Enclosure Interior
IS0137 Rev B 01/22/20
Installation Guide
NS241610-DIN, NS242412-DIN & NS242416-DIN
