background image

Overview:

Altronix NetWaySP1P converts 10/100/1000 Mbps ethernet to Fiber (1000Base-X/SX/LX)
and provides PoE.

Features:

Rev. 070717

Installation Guide

NetWaySP1P

Powered Media Converter/Injector

Agency Listings:

•  UL/cUL Listed for Information Technology 
  Equipment (UL 60950-1).
•  CE approved.

Input:

•  24VDC @ 1.5A, 56VDC @ 0.75A (30W).
•  24VDC @ 1.0A, 56VDC @ 0.5A (15W).

Fiber Port:

•  One (1) 1Gb SFP port.
•  Use with SFP module 1000Base-X (1Gb), 
  compliant to Class 1 laser product 
  (not included).

Ethernet:

•  IEEE 802.3at (30W) compliant.
•  Wire type: 4-pair CAT5e and higher.
•  Connectivity: RJ45, auto-crossover.
• Speed: 10/100/1000Mbps.
•  Distance: up to 100m.

LED Indicators:

• 

Yellow and Green LEDs (RJ45 jack):

  IP Link status, 10/100/1000 Base-T/active.
• 

Green Pwr In LED:

    Indicates unit is powered.
• 

Green PoE LED:

    Indicates PoE present.
• 

Green SFP (Fiber) LED: 

    Indicates SFP connection.

Environmental:

•  Refer to Environmental Conditions on page 3.

Dimensions 

(W x L x H approx.)

:

  3.375” x 3.8” x 1” 
  (85.7mm x 96.52mm x 25.4mm).

   Installation  Instructions:

Unit is powered via 24VDC-56VDC. NetWaySP1P is not intended to be connected to outside 
plant leads and should be installed indoors within the protected premises. 
1.  Mount NetWaySP1P in desired location utilizing the mounting hole (Fig. 1a, pg. 2)
  Use a proper fastener and/or wall anchor when securing NetWaySP1P with screw through 
  its mounting hole to the wall.
2.  Connect 24VDC-56VDC power source to terminals marked [24-56VDC – Input +].
  Terminals accommodate up to 12 AWG wires.
3.  Connect structured cable from port marked [PoE+ Output] on NetWaySP1P to a 
  PoE device (Fig. 2, pg. 2).
4.  Connect fiber optic cable to a fiber SFP module. Connect the module to the port marked 
  [SFP] on the NetWaySP1P. Connect the other end of fiber cable to an SFP module of a 
  remote device. SFP LED will illuminate indicating data connection (Fig. 2, pg. 2).

I.T.E. 43KC

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for NetWay spectrum NetWay SP1P

Page 1: ...efer to Environmental Conditions on page 3 Dimensions W x L x H approx 3 375 x 3 8 x 1 85 7mm x 96 52mm x 25 4mm Installation Instructions Unit is powered via 24VDC 56VDC NetWaySP1P is not intended to be connected to outside plant leads and should be installed indoors within the protected premises 1 Mount NetWaySP1P in desired location utilizing the mounting hole Fig 1a pg 2 Use a proper fastener ...

Page 2: ...ter Input PoE Class 1 or Higher Data 10 100 1000 PoE 10 100 1000 In PoE Fiber Signal SFP www altronix com Made in U S A NetWay8E or Midspan Endspan I T E 43KC Structured Cable to PoE Device 24VDC to 56VDC Input SFP LED Indicates data connection PoE LED Indicates PoE present One 1 Gb SFP port for Fiber Power In LED Indicates unit is powered NetWaySP1P Media Converter Injector Input 24VDC 56VDC Outp...

Page 3: ...o 70ºC 40ºF to 158ºF Storage 40ºC to 75ºC 40ºF to 167ºF Relative Humidity 85 5 Operating Altitude 304 8 to 2 000m Regulatory Compliance UL cUL Listed for Information Technology Equipment UL 60950 1 CE approved Weights approx Product 0 25 lb 0 11 kg Shipping 0 3 lb 0 14 kg PoE 30W PTZ NetWaySP1P Converts Ethernet to Fiber Provides PoE CAT5e 6 Composite Fiber Copper NetWaySP4 Series I T E 43KC I T E...

Page 4: ...ographical errors 140 58th Street Brooklyn New York 11220 USA phone 718 567 8181 fax 718 567 9056 website www altronix com e mail info altronix com Lifetime Warranty Made in U S A NetWaySP1P K29Q MEMBER Notes All manuals and user guides at all guides com ...

Reviews: