background image

-1-

* Please read through the manual before using.

* To avoid a choking hazard, keep all small parts out of reach of small children.

* Never leave the drone unattended during battery charging.

* Never throw any batteries in a fire.

* Never fly the drone near other people.

* Keep all body parts away from the drone while the rotor blades are spinning.

Battery requirements for transmitter:

4 X 1.5V “AAA” size batteries (not included)

The drone is equipped with a Li-Poly rechargeable battery,

Please also pay attention to the following safety precautions:

* Do not leave the battery near a direct heat source such as fire or space heaters.

* Do not strike or throw the battery against any hard surface.

* Do not immerse the battery in water. Always store the battery in a cool dry place.

* When recharging the device, only use the battery charger intended for this product.

* Do not allow the battery to set on the charger for over 90 minutes.

* Do not operate your drone without a fully charged battery. 

* Do not directly solder the battery to the device or pierce it with a nail or other sharp object.

* Do not transport or store the battery together with other metal objects. 

* Never leave a charging battery unattended.

Note:

* Always dispose of old batteries responsibly

SKYVIEW DRONE MODEL A4-W

FLIGHT MANUAL

Safety Precautions

Flight Time:

 7 minutes

Charge Time:

 90 minutes

Allow the battery to charge fully before operation.

Find the Quick Flight Guide on Page 4

Video Tutorials: amcrest.com/a4drone

Summary of Contents for A4-W














Reviews: