American DJ
®
4295 Charter Street
Los Angeles CA. 90058
www.americandj.com
8/07
User Instructions
American DJ
®
- www.americandj.com - Revo Scan LED™ Instruction Manual Page 2
Unpacking:
Thank you for purchasing the Revo Scan LED™ by Amer-
ican DJ
®
. Every Revo Scan LED™ has been thoroughly tested and has
been shipped in perfect operating condition. Carefully check the ship-
ping carton for damage that may have occurred during shipping. If the
carton appears to be damaged, carefully inspect your fixture for any
damage and be sure all equipment necessary to operate the unit has
arrived intact. In the event damage has been found or parts are miss-
ing, please contact our toll free customer support number for further
instructions. Please do not return this unit to your dealer without con-
tacting customer support first.
Introduction:
The Revo Scan LED™ is a four channel, DMX intel-
ligent LED fixture. The fixture can operate in three different operating
modes; stand alone, sound-active, or in a Master/Slave configuration.
The Revo Scan LED™ comes with several built in programs. When
used as a stand alone unit or when used in multiples linked in a master/
slave configuration.
For best results use fog or special effects smoke to
enhance the beams projections.
Customer Support:
American DJ
®
provides a toll free customer
support line, to provide help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments or
suggestions. Service Hours are Monday through Friday 9:00 a.m. to
5:00 p.m. Pacific Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2941
E-mail:
support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Warning!
This may cause severe eye damage. Avoid looking directly
into the light source at all times!
Revo Scan LED™
General Information
