background image

 Rev. 8/10

User Instructions

American DJ

®

  -  www.americandj.com  - Vizi LED Spot - Instruction Manual - Page 2

American DJ

®

Vizi LED Spot

Table of Contents

Unpacking......................................................................3
Introduction....................................................................3
Customer  Support......................................................................3
Safety Precautions......................................................................4
General Information.....................................................................5
Features.........................................................................5
Registration......................................................................5
Mounting.........................................................................6
Controls  and  Functions..............................................................8
DMX Set-Up................................................................................8
System Menu............................................................................14
Editing Program.........................................................................32
Error Codes...............................................................................35
Operating Modes.......................................................................37
DMX Traits.................................................................................39
Changing the Gobo...................................................................45
Photometric Chart.....................................................................47
Fuse  Replacement....................................................................48
Cleaning..................................................................48
Trouble Shooting.......................................................................48
Warranty.................................................................49
Specifications....................................................................51

Summary of Contents for Vizi LED Spot



























Reviews: