background image

a

m

PHILI Inc. 

1-888-680-0086 

www.amphili.com

       

 

ver.2012-03-29

 

 

 

 

 

FUJI Range Hood Installation Instruction 

 

WARNING:

 This installation instruction is written for professional technicians who are experienced in 

the  building  code,  electrical  and  electronic  products  installation!  This  instruction  is  for  reference  only. 
We are not responsible for any damage, injury caused by the installation of the product. 

 

 

 

Models

FUJI S0176PH,    FUJI CXW200-04A 

 
 

 

Personnel

 

1.

 

Minimum two persons required

Be able to lift 20KG 

2.

 

Be familiar with building code, electrical and electronic products installation

 

3.

 

Experienced with have all Personal Protection Equipment such as goggles, gloves etc. 

 

Tools List

 

1.

 

Screw Drivers: Philips head and slot head

 

2.

 

Electric drill with bits and hole saw

 

3.

 

Jig saw

 

4.

 

Extension cord, 18AWG wires 

5.

 

Goggles, protection gloves, helmet

 

6.

 

Portable Vacuum cleaner 

 

7.

 

Aluminum tape and electrical tape

 

8.

 

Wire binder and wire nuts

 

 

 

 

Summary of Contents for FUJI S0176PH

Page 1: ...d by the installation of the product Models FUJI S0176PH FUJI CXW200 04A Personnel 1 Minimum two persons required Be able to lift 20KG 2 Be familiar with building code electrical and electronic products installation 3 Experienced with have all Personal Protection Equipment such as goggles gloves etc Tools List 1 Screw Drivers Philips head and slot head 2 Electric drill with bits and hole saw 3 Jig...

Page 2: ...heck all the accessories Choose the correct duct exit Square or Round comes with the Range hood Default round exit installed WARNING The glass air guide is fragile1 Do not break it Tips Put the foam in the package under the range hood to protect the glass Step 2 Optional It is recommended to remove the metal L shaped brackets from both sides Step 3 For stainless steel do not remove the protection ...

Page 3: ...ith right fittings if necessary Step 7 Put the range hood on the foam with the face plate facing up Remove the five screws and disconnect the lamp wires connector and detergent exit pipe Remove the metal faceplate Step 8 Make sure the duct can fit the exit of the rang hood Cut or extend if too long or too short Duct extension or adapter are available at Rene Depot or Home Depot Use a screw and alu...

Page 4: ...ws at the back end clos2 to the wall Make sure the screw is align to the hole Do not force the screw into the hole Step 12 Remove the cardboard taped on the wall in STEP 4 Use fingers to pull out the black rubber pipes from the holes Step 13 Install three oil reservoirs The big one at back is slid in Those two under the fan are twist and lock Step 14 Remove the protection film from the stainless s...

Reviews: