background image

 

 

AMT Tech Support 

104 Hillside Road 

Sparta, NJ 07871 

Ph: 973-222-1865 

 

AMT Limited Warranty.   

  Duration of this warrantee will remain in effect for one year from the date of the original purchase.   

This warranty may be enforced by the original dated sales receipt or other proof of warranty coverage is presented when warranty 

service is required.

 

What is covered?

 Except as specified below, this warranty covers all defects in materials and workmanship in this product.   The 

following are not covered by the warranty:

 

 

1.

 

Damage resulting from accident, misuse, abuse or neglect. 

2.

 

Failure to follow instructions included with microphone. 

3.

 

Repair or attempted repair by anyone not authorized by A.M.T. 

4.

 

Failure to remove battery when storing. 

5.

 

Cause other than product defects including: lack of skill, competence, or experience of use. 

6.

 

Damages occurring during any shipment of this product (claims must be presented to carrier). 

7.

 

Damage to any unit which has been altered, or which the serial number has been defaced, modified, or removed. 

AMT will pay all labor and material expense for covered items.     Shipping charges are discussed later in this warranty.   If your unit 

needs service, please write or telephone us and we will advise you where the unit should be taken or sent.   If you write us, include 

your name, complete address, daytime telephone number, and a description of the problem. 

DO NOT RETURN YOUR UNIT TO AMT WITHOUT A REPAIR AUTHORIZATION NUMBER.

 

If it is necessary to ship the product for service:   

1.

 

You must pay initial shipping charges, but if necessary repairs are covered by the warrantee, AMT will cover the return 

shipping charges via carrier of AMT's choice to any destination within the United States. 

2.

 

Whenever warranty service is required a copy of the original dated sales receipt must be presented. 

3.

 

For products purchased outside of the USA, please contact 973-222-1865 for information pertaining to your country. 

Exclusion of certain damages:

    AMT's liability for any defective product is limited to repair of replacement of the product of our 

option.     AMT shall not be liable for damages based upon inconvenience, loss of use of the product, loss of time, interrupted 

operation, commercial loss; or any other damages whether incidental, consequential, or otherwise.    Some states do not allow 

limitations an implied warrantee lasts, and/or do not allow the exclusion or limitations of incidental or consequential damages, so the 

above limitations may not apply to you.    This warrantee is not enforceable outside of North America.    This warrantee gives you 

specific legal rights, and you may also have other rights, which vary from state to state. 

For International Customers (Outside of the United States): 

If the product is purchased inside of the United States and taken to another country, it is the responsibility of the product owner to 

cover  all  shipping,  customs,  and  duty  if  a  warranty,  upgrades,  and repair issue  is  necessary.    All  provisions  of  the  warranty  above 

apply  except  for  Shipping  and  all  costs  related  to  shipping.  Ie  Customs  charges  and  V.A.T.  are  not  covered  by  AMT.    All  outside 

charges  associated  with  re-entry  of  the  product  into  the  USA  is  the  sole  responsibility  of  the  product  owner.    At  no  time  shall  a 

distributor  or  a  dealer  take  it  upon  them  selves  to  replace  a  defective  system  with  a  new  system.    This  can  only  be  done  with  the 

permission of AMT’s tech support (973-222-1865) directly or through a distributor of the country purchased with AMT tech support 

approval. 

Repairs: 

1)

 The customer, dealer, or distributor should contact AMT tech support via phone (973-222-1865 E.S.T. 12pm - 12am) or email with 

a short description of the problem.    Use the RETURN REPAIR form to send products for repair. 

2)

 If out of warranty, we then advise the customer to call by phone to our tech support 1-973-222-1865 for a return authorization and 

to discuss possible solutions before sending. 

3)

 Date and origin of purchase required for warranty repair.    If the product is covered under warranty, the product must ship back to 

AMT, when completed, AMT will ship it back with the distributor’s next order.     

Summary of Contents for Quantum 7












Reviews: