background image

 

EVAL-ADAQ8088EBZ

 User Guide 

UG-1825

One

 

Technology

 

Way

 

 

P.O.

 

Box

 

9106

 

 

Norwood,

 

MA

 

02062-9106,

 

U.S.A.

 

 

Tel:

 

781.329.4700

 

 

Fax:

 

781.461.3113

 

 

www.analog.com 

 

Evaluating the 

ADAQ8088

 Dual-, Differential, Low-Pass Filter μModule 

with Gain and ADC Driver 

 

 
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT  
WARNING AND LEGAL TERMS AND CONDITIONS.

 

Rev. 0 | Page 1 of 12 

FEATURES 

3 common signal processing and conditioning blocks, a 

preamplifier, an 8-pole filter, and an ADC driver integrated 
to support a variety of demodulator applications 

No external components required for proper operation 

EVALUATION KIT CONTENTS 

EVAL-ADAQ8088EBZ evaluation board 

EQUIPMENT NEEDED 

Bench supply of 2.7 V to 3.3 V 
SMA cables 
4-Port or 2-port network analyzer 
AD9681-125EBZ evaluation kit 
HSC-ADC-EVALEZ evaluation kit 
Keysight 33600A generator 
Allen Avionics LPF #F3056-7P7 (2 pieces) 
PC running Windows® 

GENERAL DESCRIPTION 

The EVAL-ADAQ8088EBZ evaluates the ADAQ8088 and requires 
a 2.7 V to 3.3 V power supply for proper operation. The EVAL-
ADAQ8088EBZ accepts baseband differential in-phase/quadrature 
(I/Q) inputs via Subminiature A (SMA)connectors (Jx) and 
drives pipeline analog-to-digital converters (ADCs) via SMA 
output connectors. The EVAL-ADAQ8088EBZ contains the 
ADAQ8088 μModule, which is a dual-channel analog system in 
package (SIP) that integrates three common signal processing 
and conditioning blocks to support a variety of demodulator 
applications and data acquisition applications. The device 
integrates all active and passive components to form a complete 
signal chain between the output of an I/Q demodulator and the 
input to an ADC. For full details on the ADAQ8088, see the 
ADAQ8088 data sheet, which must be consulted in conjunction 
with this user guide when using the EVAL-ADAQ8088EBZ.  

 

 

EVAL-ADAQ8088EBZ PHOTOGRAPH 

 

Figure 1.  

 

 

25399-

001

Downloaded from

Arrow.com.

Summary of Contents for EVAL-ADAQ8088EBZ













Reviews: