Easy Installation Guide
To learn more about AOpen XC Cube, visit us at http://xc.aopen.com.tw, http://www.aopen.com
P/N:49.MZ102.0A2 Doc.No:MZ855-II_915-M-EG-E0509B
MZ855-II / MZ915-M
MZ855-II / MZ915-M
MZ855-II / MZ915-M
MZ855-II Series
MZ915-M Series
Plug the RJ45 cable into the
network jack (recognizable
by an icon with three tiny
computers). [ Depending on
models. ]
1
2
4
3
5
6
Connect the purple keyboard
connect or to the matching purple
connect or at the rear panel. Also
connect the green mouse
connect or tothe green connector
at the rear panel.
Connect the speakers' audio cable
to the light green speaker jack at the
rear panel. Also insert the speakers'
power plug into a properly grounded
AC wall socket. [ Depending on
models. ]
Connect the microphone cable
to the pink microphone jack at
the rear panel. [ Depending on
models. ]
Depending on the type of
printer that you have,connect
the printer's data cable to the
blue-colored parallel port as
shown in the picture.
8
7
Connect the other end of the
power cord to the AC wall
socket, and press the power
button to boot up your system.
Connect the power cord to
the system's power connector
as shown.
Connect the monitor's video
cable to the blue monitor
connect or located at the
rear panel.
4-pin ATX Power
AGP 4X
PCI slot
Front Audio
IDE Connector x 2
(ATA33/ 66/100)
JP14 CMOS Jumper
Front Panel
Connector
AC'97 CODEC
CD_IN
AUX_IN
JP4 & JP5
AUX_IN Jumper
USB 2.0 x 4
DDR333/266/200
DIMMx 2
Max. 2 GB
ATX Power
IEEE 1394 x 2
JP28 KB/MS
Wake_up Jumper
Back Panel
CPUFAN1
Printer Connector
FDD Connector
479-pin CPU Socket
supports Intel®
Pentium® M and
Celeron® M CPU
Intel
ICH4-M Chipset
FSB 533 Enable Jumper
Switch to pin 1 & 2 for 400MHz*
Switch to pin 2 & 3 for 533MHz
*default
4-pin ATX Power
IDE Connector x 1
(ATA33/ 66/100)
Serial ATA X 4
USB 2.0 x 4
EPS ATX Power
IEEE 1394 x 2
JP28 KB/MS
Wake_up Jumper
Back Panel
Printer Connector
7.1 Channel CODEC
Front Audio
CD_IN
PCI slot
PCI express X 16
FDD Connector
479-pin CPU Socket
supports Intel®
Pentium® M and
Celeron® M CPU
Intel 915G +
ICH6 Chipset
DDR2 400/533
Max. 2 GB
SYSFAN
CPUFAN1
Front Panel
Connector
USB 2.0
TV OUT (S-Video)
Y/Pb/Pr Composite
SPDIF OUT
COAXIAL OUT
D4 OUT
Cooler Installation
Technical Notice
1
Push four iron plates up a bit
and then put CPU cooler firmly
onto the CPU retention module.
Note:
For Optimized
heat-dissipating, the fan should
be placed next to the slots
onboard.
*
MZ855-II and MZ915-M are designed
for LVDS ( low voltage differential signal
interface ), there will be the possibility
that the monitor won't work properly
after powering on. If this condition
happens, please press
< Ctrl + Alt + F1 >
concurrently to enable the monitor.
2
Press four iron plates
downward till you hear a "chip"
sound.
3
Connect the fan cable onto the
CPU FAN connector onboard.
Socket 479 CPU Frequency Table
Vender
Processor
FSB
Multiplier
Intel
Pentium M 770 ( 2.13 GHz-Dothan )
533 MHz
16 x
Intel
Pentium M 760 ( 2.00 GHz-Dothan )
533 MHz
15 x
Intel
Pentium M 750 ( 1.86 GHz-Dothan )
533 MHz
14 x
Intel
Pentium M 740 ( 1.73 GHz-Dothan )
533 MHz
13 x
Intel
Pentium M 730 ( 1.60 GHz-Dothan )
533 MHz
12 x
Note: With CPU changing rapidly, there might be fastest CPU on the
market by the you received this installation guide. This table is kindly for
your references only.
MZ915-M Series
Power Button
Optical Device
/ Slim Device Bay
HDD Indicator
IEEE1394 Port
(6 pin)
IEEE1394 Port (4 pin)
S/PDIF OUT Port
Earphone Jack
Microphone Jack
USB 2.0 Ports
S/PDIF IN Port
Ethernet Network
Connector (RJ45)
USB 2.0 Ports
Coaxial Out RCA Port
IEEE1394 Port
(6 pin)
Line-In Jack (SUR)
Line-Out Jack (L/R)
Microphone
Jack (C/B)
Line-In Jack
SPDIF-IN
Line-Out Jack (L/R)
Microphone
Jack
COM1 Port
Monitor Connector
PS/2 Mouse Connector
PS/2 Keyboard Connector
IEEE1394 Port
(6 pin)
USB 2.0 Ports
Ethernet Network
Connector (RJ45)
SIDE L/R
TV OUT
Y/Pb/Pr
S-Video
Composite
D4 TV-Out
(Optional)
Center/Sub-woofer
Surround L/R
MZ855-II
MZ915-M
Intel
Pentium M 770 ( 2.13 GHz-Dothan )
533 MHz
16 x
Intel
Pentium M 760 ( 2.00 GHz-Dothan )
533 MHz
15 x
Intel
Pentium M 750 ( 1.86 GHz-Dothan )
533 MHz
14 x
Intel
Pentium M 740 ( 1.73 GHz-Dothan )
533 MHz
13 x
Intel
Pentium M 730 ( 1.60 GHz-Dothan )
533 MHz
12 x
Intel
Pentium M 755 ( 2.0 GHz-Dothan )
400 MHz
20 x
Intel
Pentium M 745 ( 1.8 GHz-Dothan )
400 MHz
18 x
Intel
Pentium M 735 ( 1.7GHz-Dothan )
400 MHz
17 x
Intel
Pentium M 725 ( 1.6GHz-Dothan )
400 MHz
16 x
Intel
Pentium M 715 ( 1.5GHz-Dothan )
400 MHz
15 x
Intel
Pentium M 1.7GHz ( Banias )
400 MHz
17 x
Intel
Pentium M 1.5GHz ( Banias )
400 MHz
15 x
Intel
Celeron M 360 ( 1.4GHz-Dothan )
400 MHz
14 x
Intel
Celeron M 350 ( 1.3GHz-Dothan )
400 MHz
13 x
Intel
Celeron M 340 ( 1.5GHz-Banias )
400 MHz
15 x
MZ855-II Series
Socket 479 CPU Frequency Table
Note: With CPU changing rapidly, there might be fastest CPU on the
market by the you received this installation guide. This table is kindly for
your references only.
Vender
Processor
FSB
Multiplier
If the user intends to use the HDTV video output from an add-on VGA card, s/he
needs to take out all the shorting caps of JP29, JP30. Please save the shorting
caps in a safe place in case the user intends to use the on-board HDTV
connector.
JP29
JP30
HDTV
ON
ON
PCIE CARD
OFF
OFF
The HDTV output interface connector on
the back panel of the system is enabled by
applying shorting caps to JP29, JP30 as
shown in the illustrtion.
HDTV Selection Jumper Setting
*
MZ915-M already has built-in TV-out
functionality; therefore, it cannot support
a separate ADD2 (TV tuner) card in the
PCIe slot.
C
M
Y
CM
MY
CY
CMY
K
MZ855-II_915-M-EG-E0509B.pdf 2005/9/15 上午 11:01:04
MZ855-II_915-M-EG-E0509B.pdf 2005/9/15 上午 11:01:04
