APW Wyott's Dispensers are backed by a 1 year parts &
labor warranty, including On-Site Service calls within 50
miles of authorized service technicians.
Tube construction is stainless steel with polished flange and
dispensing head. Easy drop-in insulation. The dispensing
mechanism in APW Wyott's Lowerators® uses springs
attached to a sliding support bar that rides both inside and
outside the tube. This design feature prevents a stack of
dishware from sticking in the down position, and releasing
unexpectedly. Flange supports unit on countertop after simple
cutout is made. Shielded unheated tubes are available.
Heated tubes are provided with 5-foot length of flexible metal
conduit with standard 1/2" fitting and 6" wire leads for easy
connection to junction box for 120V service.
Models L, SL and HL Adjustube® Dispensers are used to
dispense dishes, cups, glasses, bowls, plate covers and other
round dinnerware. This tube-type, self-leveling dispenser is
easily installed in serving counters, back bars, and other service
points.
• Samples are not needed. Just select the tube for the
diameter of dinnerware to be used from the table on the
reverse side of this sheet.
• Spring rate adjustments can be easily made in the field
without tools.
• Non-marking, stylized guideposts protect china from chipping.
• Stabilizing mechanism insures that contents remain level at
all times.
• Samples are not needed. Just select the tube for the
diameter of dinnerware to be used from the table on the
reverse side of this sheet.
(SL)
(HL)
(L)
Rev. 1/1/2003
