www.aqua-free.com
Instructions for use
1 Product
1.1 Product description
Table of contents
1 Product
2 Certificates / Declaration of conformity
3 Labelling
4 Preparation of commissioning and use of product
5 Disassembly of used filter / filter change
6 Accessories
7 Maintenance / cleaning
8 Storage
9 Return
7 Maintenance and cleaning
The Germlyser
®
W requires no maintenance within the specified operating time. The outside of the filter
can be cleaned using common surface disinfectants.
When replacing the Germlyser
®
W, a small amount of unfiltered water will flow out. Over time, this will lead
to deposits on and in the adapters. Aqua
free
recommends replacement of the adapters after a period of
6 to 12 months.
In the case of a deviation from the specifications or a damage to the packaging, the product should be
returned to Aqua
free
, along with a Defect Report (form available to download on the service page of the
Aqua
free
website www.aqua-free.com).
Please note:
Aqua
free
operates its own replacement service, which can be used by facilities with 25 or
more filterpoints of use.
8 Storage
The Germlyser
®
filter must be properly stored in a dry and hygienic environment at a temperature between
10 and 50°C.
9 Return
The Germlyser
®
reusable filters must be sent back to Aqua
free
within the agreed time for reprocessing
(form downloads at the service page under www.aqua-free.com).
GEBR-ANW-W-GB-0
5
/20
21
-V00
3
Germlyser
®
W
The Germlyser® W is a -marked, point-of-use sterile shower filter for use in birthing pools and burn baths
to prevent bacterial nosocomial infectious diseases caused by
Pseudomonas aeruginosa, Legionella
pneumophila, Stenotrophomonas maltophilia
or
Staphylococcus aureus
among immunosuppressed and
immunocompromised patients.
1.2 Technical data
Size:
L 206 mm x Ø 43 mm
Retention:
7 log steps
Brev. dim.
Pore size:
0.2 µm
Operating time*:
4 weeks
Chlorine resistance**: ≤10 ppm
Flow rate:
20 l/min at 5 bar, at 25°C
Max. operating pressure***: 5 bar at 60°C
Max. operating temperature: 60°C (at 70°C < 30 min.
over operating time)
Connection:
Quick-release coupling
Headquarters:
Aqua free GmbH
Winsbergring 31
22525 Hamburg
Germany
Phone:
+49 (0)40-46 89 99 90
Fax:
+49 (0)40-46 89 99 99
info@aqua-free.com
www.aqua-free.com
Aqua free Solutions Ltd.
The Media Centre
7 Northumberland Street
Huddersfield, HD1 1RL, Great Britain
E-Mail:
info@aqua-free.co.uk
Phone:
+44 (0)1484 483045
* The operating time can be increased up to 8 weeks if sufficient hygienic measures exist and an adequate
hygiene plan is carried out. We recommend monitoring by appropriate clinical microbiological testing.
** Continuous dosage of ≤ 10 ppm over operating time; short-term (1h) high dosage (400,000 ppm)
for chemical disinfection.
*** The Germlyser
®
W is not suitable for connection to low-pressure systems (e.g. boilers).
