8259
Aqua Select
®
Crossover and Enclosure
Model
832405B
•
Hammer and a wood block or rubber mallet
•
Phillips head screwdriver
•
Drill with 1/8” drill bit
•
Pliers
•
Liquid soap or lubricant
This crossover is intended for use with the
Aqua Select
®
Everest Bridge Systems. Please start by assembling
BOTH steps using instructions provided in the STEP BOX, model 832402B. Refer to these directions once you
have assembled both steps.
If you are installing the
Aqua Select
®
Everest Bridge System, please check the carton labeled “GATE CARTON”
model 832406 for instructions on gate assembly and attachment, upon completion of installation of crossover.
TOOLS REQUIRED
FOR USE WITH:
EVEREST
BRIDGE SYSTEM
(832421B)
(2)
832402B —
Aqua Select
®
Everst Steps
(1)
832405B —
Aqua Select
®
Crossover and Enclosure
(1)
832406 —
Aqua Select
®
Gate
CARTONS REQUIRED
