28
SPECIFICATIONS:
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
www.aquaticwhirlpools.com 800.555.5324
March 2008
Rough-In Plumbing
Measurements
CENTury 41
CENTury SErIES
Model
# AI7248RC41
47 1/2”
28”
71 1/2”
47 1/2”
GeneRal SPecIfIcatIonS:
Tub Size
71 1/2” x 47 1/2” x 29”
x 41” x 27 3/4”
182 cm x 121 cm x 74 cm
Bathing Well
48” long
48 ” long
32” wide
23” interior depth
Shipping Weight
276 lbs. / 125 kg
Tub Weight Filled
1350 lbs. / 612 kg
Weight w/Equipment
196 lbs. / 89 kg
Gallons to Overflow
139 gal. / 526 L
Gallons to Operate
1 bather: 120 gal. / 454 L
2 bather: 89 gal. / 337 L
electRIcal SPecIfIcatIonS:
Pump
2 HP; 11 AMP; 110V
Requirement
15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
Inline Heater
1.5 kW; 12 AMP; 110V
Requirement
15 AMP; 110V, separate circuit
required protected w/ Class A GFCI
F
This unit is not recommended for shower installations.
This unit has a 3/4” male waterfall fill spout connection.
C
•
Comfort Pillow - Oval or Rectangle
•
Jet Finish
- Chrome, Polished Brass, Gold, Polished Nickel
or Satin Nickel
•
Lift & Turn Waste and Overflow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
•
Cable Drive Waste and Overflow
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or Color Matched
(Bone, White and Biscuit Only)
•
Hand Held Jet - Chrome or Polished Brass
•
Optional Pump Location
•
Remote Pump Location
•
Premium Colors
All acrylic colors featured by Aquatic match the
industry’s leading fixture manufacturers.
oPtIonal equIPMent:
fax-on-Demand
Document # 1025
StanDaRD equIPMent:
10 Hydrotherapy Jets including:
- 3 Recessed Rotary Massage Jets
- 2 Pressure Plus Hydrotherapy Jets
- 2 Rotary Massage Foot Jets
- 2 Full Size Pressure-Flo Hydrotherapy Jets
- 1 Recessed Fan Jet
aquatic quality features:
- 2 HP, 3-Speed Run-Dry Pump
- Bath-Side Electronic Control Panel
- Integrally Molded Fast-Fill Waterfall Spout (valves not included)
- Chromatherapy
- 1.5 kW Inline Maintenance Heater
- ”Quiet Pad”
Anti-Vibration Pump Mount for Quiet Pump Operation
- 2 Extra-Deep Contoured Lounges
- 2 Color Matched Grab Bars
- 2 Arm Rests
- Slip Resistant Floor
- Pre-leveled ABS Support Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to C
lean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
ul & IaPMo listed, factory tested
limited lifetime Warranty
Two Person Bath
29”
21 1/4”
22 3/8”
24 3/4”
Fill Spout Location
5”
28”
*not available without fast-fill Waterfall Spout.
1
2
