background image

99

  SPECIFICATIONS:

The manufacturer accepts a 1/4” variance.  There are variations on each tub and specifications are subject to change as we improve upon our product as required.  The dimensions needed for site preparation 
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.

www.aquaticwhirlpools.com     800.555.5324

August 2008

Rough-In Plumbing 
Measurements 

21 1/4”

22”

41 3/4”

25”

59 1/2”

Two Person Bath

41 3/4”

38 1/2”

24 1/2”

HOTSOAK 53

 

HOTSOAK SERIES 

Model # 

ai6042ClHS

GeneRal SPecIfIcatIonS:

Tub Size 

59 1/2” x 41 3/4” x 25”

   

151 cm x 106 cm x 64 cm

Bathing Well 

38 1/2” long

   

24 1/2” wide

   

22 3/4” interior depth

Shipping Weight 

180 lbs. / 82 kg

Tub Weight Filled 

863 lbs. / 391 kg

Tub Only Weight 

114 lbs. / 52 kg

Gallons to Overflow  90 gal. / 341 L

electRIcal SPecIfIcatIonS:

Pump 

1/15 HP; 1.3 AMP; 110V

Heater 

1.5 kW; 12.5 AMP; 110V

Requirements 

20 AMP; 110V, separate circuit  

   

required protected w/ Class A GFCI

 

This unit is not recommended for shower installations.

• 

Chromatherapy LED Lighting*

• 

Comfort Pillow - Oval or Rectangle

• 

 Grab Bar 

  -  White, Biscuit, Chrome, Polished Brass, Gold,  

    Polished Nickel, Satin Nickel or Oil Rubbed Bronze

• 

Lift & Turn Waste and Overflow 

  -  Chrome, Polished Brass, Gold, Polished Nickel, 
    Satin Nickel or Oil Rubbed Bronze

• 

Cable Drive Waste and Overflow 

  -  Chrome, Polished Brass, Gold, Polished Nickel, 
    Satin Nickel, Oil Rubbed Bronze or 
    Color Matched (Bone, White and Biscuit Only)

• 

Factory Installed Rigid ABS Tile Flange

• 

Optional Pump Location

• 

Color Matched Acrylic Skirt

• 

Premium Colors

All acrylic colors featured by Aquatic match the industry’s 

leading fixture manufacturers.

*This whirlpool will need to be hard wired to the breaker box.

Three outlets will be supplied on the whirlpool.

oPtIonal equIPMent:

aquatic quality features:

- 1.5 kW Inline Maintenance Heater
- Run-Dry Pump with 20-Minute Timer
- 2 Circulation Portal Covers
- Bath-Side On/Off Electronic Button
- ”Quiet Pad”

 

Anti-Vibration Pump Mount for Quiet Operation

- Color Matched Grab Bar
- 4 Arm Rests
- Slip Resistant Floor
- Pre-leveled ABS Support Base
- Heat-bent Rigid PVC Piping for Optimum Sanitary Conditions
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors

ul & IaPMo listed, factory tested

limited lifetime Warranty

StandaRd equIPMent:

fax-on-demand

document #1228

5 1/8”

11 3/4”

4

3

2

1

Reviews: