A41311 1 11/08/19
Model A41311
1/2" Push Button Impact Wrench
For Technical Questions, Call: 1-800-879-7316
WARNING INFORMATION
This is the safety alert symbol. It is used to alert you
to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible
injury or death.
IMPORTANT: READ THESE INSTRUCTIONS BEFORE OPERATING
BEFORE USING THIS DEVICE, READ THIS MANUAL COMPLETELY AND THOROUGHLY, UNDERSTAND ITS OPERATING
PROCEDURES, SAFETY WARNINGS AND MAINTENANCE REQUIREMENTS.
It is the responsibility of the owner to make sure all personnel read this manual prior to using the device. It is also the
responsiblity of the device owner to keep this manual intact and in a convenient location for all to see and read. If the
manual or product labels are lost or not legible, contact Arcan® Professional Tools for replacements. If the operator is not fluent
in English, the product and safety instructions shall be read to and discussed with the operator in the operator's native language
by the purchaser/owner or his designee, making sure that the operator comprehends its contents.
METHODS TO AVOID HAZARDOUS SITUATIONS
• Read, Study, understand & follow all instructions before operating this product.
• Always operate, inspect and maintain this tool in accordance with American National Standards Institute Safety Code of
Portable Air Tools (ANSI B186.1) and any other applicable safety codes and regulations.
• For safety, top performance and maximum durability of parts, operate this tool at 90 psig; 6.2 bar max air pressure with
3/8" diameter air supply hose.
• Always wear impact-resistant eye protection when operating or performing maintenance on this tool (users and bystanders).
• High sound levels can cause permanent hearing loss. Always use hearing protection as recommended by your employer an
OSHA regulations while using this tool (users and bystanders).
• Keep the tool in efficient operating condition.
• Operators and maintenance personnel must be physically able to handle the bulk, weight and power of this tool.
• Air under pressure can cause severe injury. Never direct air at yourself or others. Always turn off the air supply, drain hose
of air pressure and detach tool from air supply before installing, removing or adjusting any accessory on this tool, or before
performing any maintenance on this tool. Failure to do so could result in injury. Whip hoses can cause serious injury. Always
check for damaged, frayed or loose hoses and fittings, and replace immediately. Do not use quick detach couplings at tool.
See instructions for correct set-up.
• Keep tool out of reach of children.
• Air powered tools can vibrate in use. Vibration, repetitive motions or uncomfortable positions over extended periods of time
may be harmful to your hands and arms. Discontinue use of tool if discomfort, tingling feeling or pain occurs. Seek medical
advice before resuming use.
• Slipping, tripping and/or falling while operating air tools can be a major cause of serious injury or death. Be aware of excess
hose left on the walking or work surface.
• Place the tool on the work before starting the tool. Do not point or indulge in any horseplay with this tool.
• Keep body working stance balanced and firm. Do not overreach when operating the tool.
• Note direction of rotation BEFORE operating this tool.
• Anticipate and be alert for sudden changes in motion during start up and operation of any power tool.
• Do not carry tool by the hose. Protect the hose from sharp objects and heat.
• Tool shaft may continue to rotate briefly after throttle is released. Avoid direct contact with accessories during and after use.
Gloves will reduce the risk of cuts or burns.
WARNING: Indicates a hazardous situation
which, if not avoided, could result in death
or serious injury.
WARNING
WARNING
WARNING
