background image

6

5

IDENTIFICATION

Fig. 2

7

8

16

15

18

For all Sales enquiries:
Phone 03 9727 8860  Fax 1300 360 650

CPIN 598

© This instruction leaflet is subject to copyright and must not be reproduced,
copied or otherwise used in any way or for any purpose without the consent in
writing of the owner.

Instruction Manual

Air Compressor 

2.5HP 40Litre

Important! Please read these instructions carefully before use.

Due to continuous research and development the specifications herein are subject to change without notice.

KMAC2540

Fig. 3

13

5

14

20

19

17 (At rear, near base of Pressure 

Switch Cover)

1

2

4

3

5

6

7

8

10

12

Fig. 1

18

9

11

1. Air Tank
2. Handle
3. Air Inlet Filter 
4. Compressor Cylinder Head
5. Compressor Crankcase
6. Motor Cover
7. On/Off Switch
8. Pressure Switch
9.  Compressor Regulator
10. Pressure Gauge
11. Regulated Outlet Gauge

12. Drain Valve
13. Oil Filler Cap

refer Fig. 3

14. Oil Level Sight Glass

refer Fig. 3

15. Compressor Outlet 

refer Fig. 2

16. Compressor Outlet Tap 

refer Fig. 2

17. Compressor Safety Valve 

refer Fig. 2

18. One Way Valve
19. Reset Button

refer Fig. 3

20. Oil & Drain Plug

refer Fig. 3

Summary of Contents for ENFORCER Air KMAC2540

Page 1: ...therwise used in any way or for any purpose without the consent in writing of the owner Instruction Manual Air Compressor 2 5HP 40Litre Important Please read these instructions carefully before use Due to continuous research and development the specifications herein are subject to change without notice KMAC2540 Fig 3 13 5 14 20 19 17 At rear near base of Pressure Switch Cover ...

Page 2: ...d for the tool and follow instructions provided with tool 21 Don t leave unattended Do not leave the compressor operating while unattended for extended periods of time If you have finished using the compressor and associated tools switch off supply and remove the plug 22 Operating Time The compressor motor is designed to run intermittently and maintain the tank and associated equipment at rated op...

Page 3: ... to remove any adjustment keys spanners and wrenches before switching on the tool 20 Nailers and Tackers Take particular care with air nail guns Observe all above safety points particularly avoid pointing the tool at others and carrying by the trigger Only use fasteners intended for the tool and follow instructions provided with tool 21 Don t leave unattended Do not leave the compressor operating ...

Page 4: ...until the oil level is inside the circle on the oil level sight glass Refit the oil filler cap 5 Regularly check the operation of the safety valve 17 by pulling firmly on the ring of the valve The air in the tank should discharge and stop again when the ring is released GUARANTEE Arlec guarantees this product against defects of materials and workmanship for a period of 24 months from the date of p...

Reviews: