Specifications
Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.
Please read this manual carefully before using the flashlight.
USER MANUAL
FLASHLIGHTS AND CHARGERS IN THE WORLD
THE MOST TECHNICALLY ADVANCED
Armytek Optoelectronics Inc.
is a Canadian manufacturer that produces smart and universal chargers designed especially for your
needs. The components
by
the USA and Japan.
.
5 years no-hassle warranty
Warnings
Specifications are subject to change without notice.
Armytek Optoelectronics Inc.
Web: www.armytek.com Email:
service@armytek.com
Address:
13-85 West Wilmot St, Richmond Hill, Ontario, L4B 1K7, Canada
Service and Warranty
Armytek provides free warranty repair for 5 years from the
date of
purchase
(
excluding batteries, switches and connectors
which have 2 years warranty). Warranty doesn't cover damage caused by
improper usage, described above in Warnings section.
Uni C2
Universal charger
Additional features:
џ
Charging of the batteries with diameter 10..32mm and length 30..70mm, for example:
AA, AAA, AAAA, C, D, 10440, 14500, 16340, 18350, 18650, 26650, 32650
џ
Digital control of precise charge algorithm and advanced safety features to extend battery lifespan
џ
Instant battery type and current indication upon installation and their easy individual settings per channel (after auto-detection
of IMR/Li-Ion 4.2V or Ni-MH/Ni-Cd 1.5V)
џ
Capability of hand settings for battery type and low current, also charging of battery, which is recognized as bad
џ
Always visible LED indication of the current and battery charge level per each channel (without button touching)
џ
Auto-memorization of last used battery type
џ
Night mode of LED indication with lower brightness after 30 sec
џ
Short-circuit and overtime prevention to protect batteries (20 hours for 0.5/1A and 30 hours for 0.1A current)
џ
Soft-start function to avoid damage from high current
џ
Optimized charge algorithm for IMR and Li-Ion/Li-FePO4 batteries with Trickle charge and CC/CV stages
џ
Utilizes independent negative delta V control (dV/dt) for Ni-MH/ Ni-Cd batteries charging termination
Technical parameters:
Input: AC
85
-2
64
V / 0.5A (50/60Hz) or DC
9-14
V / 1A
Output per each channel
:
Voltage:
4.35
V / 4.2V / 3.7V / 1.5V
Current: 1A / 0.5A / 0.1A
Low Cut-off current: 40mA (0.5A) or 80mA (1A)
Size / Weight:
145x72x37mm
/
168g
Easy selection of battery type and charge
current with one button
per each channel
SIMPLE
CONTROL
Multi-color LED indication with Night mode
and useful 5 LEDs per channel
Intelligent automatic detection of battery
type, charge level
and optimal current
AUTO
DETECT
Designed for excellent heat dissipation
and made with fire-proof materials
±
C
°
ALL
TYPES
Supports IMR, Li-Ion 4.2V, Li-Ion 4.35V,
Ni-MH, Ni-Cd and Li-FePO
4
batteries
AUTO
TEST
Auto-detection of bad batteries, reverse
polarity and primary batteries
CAR
ADAPTER
Monolitic design with AC 85-264V input
and DC 9-14V car adapter inside
Automatically stops the charging when
complete depending on the battery
Quick charge with fully independent
channels
and 1A current for each
х
2
1А
0V
START
Over-discharged and sleeping battery
activation function with safe 0.1A current
AUTO
STOP
џ
Before using battery charger, read all instructions and caution markings on the charger, battery and device using battery.
џ
To reduce the risk of injury, charge only Li-Ion, IMR, Ni-MH, Ni-Cd, LiFePO
4
rechargeable batteries
.
џ
Do not charge primary cells like Alkaline, Zinc Carbon, Lithium or any batteries other then accepted above, as this could result
in battery explosion, cracking or leaking, causing property damage and/or personal injury.
џ
The product should not be used immediately after it has been brought from an area of cold temperature to an area of warm
temperature. Condensed water might destroy the product. Wait until the product adapts to the new ambient temperature
before use.
џ
Keep batteries away from fire to prevent explosion.
џ
For proper insertion, please observe polarity indicators (+/-).
џ
For indoor use only. Do not expose to rain or snow.
џ
Do not place in or near water or extreme heat.
џ
Do not use charger with damaged cord or plug.
џ
Do not use charger if it has been severely damaged in any way.
џ
Do not disassemble charger.
џ
Disassembly may result in a risk of electric shock or fire.
џ
To reduce the risk of electric shock, unplug the charger from the outlet when not in use.
џ
Batteries should be removed from the device if it is not used for a long period of time to avoid damage through leaking.
Leaking or damaged batteries might cause acid burns when in contact with skin, therefore use suitable protective gloves to
handle corrupted batteries.
џ
Never charge or discharge any battery having evidence of leakage, expansion/swelling, damaged outer wrapper or case, color-
change or distortion.
џ
Please make sure the correct settings are chosen. Incorrect settings may damage the charger or cause fire or explosion.
џ
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
џ
For connection use an attachment plug adapter of the proper configuration.
џ
Do not expose the device to direct sunlight, heating devices, open flames; avoid extreme high or extreme low ambient
temperatures and sudden temperature changes.
џ
Please operate the charger in a well-ventilated area. Do not operate or store it in damp area. Keep all the inflammable volatile
substances away from operating area.
џ
Avoid mechanical vibration or shock as these may cause damage to the device.
џ
The safe operation temperature for the charger is between -10 to 40°C, and the safe storage temperature is -20 to 60°C.
џ
Do not short-circuit slots or other parts of the device. Do not allow metal objects come into contact with charger. May cause
electric shock, excessive heat, or fire.
џ
Do not place heavy objects on top of the charger. Avoid unstable locations like areas with strong magnetic fields or dust.
Excessive heat or fire may cause.
џ
Do not touch hot surfaces. The rechargeable batteries or the device may become hot at full load or high power
charging/discharging.
џ
This power unit is intended to be correctly oriented in a vertical or floor mount position.
