background image

Dear customer, thank you and congratulations 

on the purchase of your speakers(s). If you read 

the following instructions and keep them, you 

will be able to enjoy them for a long time! 

SAFETY MEASURES 

•  Read all instructions carefully before use.

•  Check that the voltage on the type label corre-

sponds with your mains voltage.

•  Do not disassemble or modify the speaker.

•  Do not place the speaker in a spot where it is 

continuously exposed to sunlight or near an 

open fire like a wood-burning stove, burning 

candles, etc.

•  Never expose the speaker to high tempera-

tures, dusty environments or strong vibrations 

or influences.

•  Protect your ears. Listening to a high volume 

for longer periods may lead to permanent 

hearing loss.

•  The speaker may only be repaired by qualified 

service technicians.

•  The speaker is splashproof. Do not plunge the 

speaker in water as this leads to permanen 

damage.

•  Do not expose the speaker to water while 

charging.

COMPATIBILITY

•  This product is compatible with mobile 

phones and Bluetooth-enabled devices.

EMPTY BATTERY

When the internal battery level drops below 

10%, a warning sound will be heard once and 

the LED indicator will blink red   until the Kurv 

is sufficiently charged again.

The battery charges automatically when you 

reconnect it to the power brick and plug it into 

the mains socket. Once fully charged, the LED 

indicator turns blue

OPERATION 

Turn on/off

Press and hold the on/off button ( 

 ) for at 

least 5 seconds to turn on the Kurv.

Press and hold the on/off button briefly to turn 

off the Kurv.

STANDBY

When the Kurv is not actively connected with a 

device (via Bluetooth), it will turn off automati-

cally after 15 min to avoid unnecessary battery/

power consumption.

PAIRING 

After switching on the Kurv, it will first go into 

TWS pairing mode. This is indicated by a rapid-

ly flashing green LED indicator  .

A 2

nd

 Kurv, if you have one, (which should also 

be in 

TWS pairing mode

) can now pair itself 

automatically. This TWS pairing mode lasts for 

20 seconds.

Bluetooth pairing mode

After 20 seconds, the Kurv will switch to the 

Bluetooth pairing mode. The indicator LED will 

slowly blink green   when the speaker was 

successfully paired before. If a previous TWS 

pairing was unsuccessful, or when using one 

unit, (Kurv plays standalone), the LED indicator 

will slowly blink blue   .

The Kurv is now waiting to be paired with an 

external playback device

The LED indicator lights up green continuously 

 (TWS active), or blue   (standalone) when the 

Bluetooth connection is successful and active.

KURV BT

MANUAL  

OPTIONAL (SUPPORT KURV)

UNPAIRING PRODUCTS

•  Disconnect the currently paired playback de-

vice: briefly press and hold the BT button. The 

Kurv then returns to Bluetooth pairing mode.

•  Go back to the TWS pairing mode: press and 

hold the BT button for at least 5 seconds. The 

Kurv then goes back to the TWS pairing mode 

for 2 minutes before returning to the BT pairing 

mode.

•  To clear the list of paired Bluetooth devices: 

press and hold the power button ( ) for at least 

5 seconds when the Kurv is already turned on.

•  Resetting the Kurv: briefly press and hold the 

reset button.

BT

RESET

>>>

1

  

TWS  pairing ...

rapidly

slowly

continuously

TWS 

BT pairing ...

 

TWS 

BT

TWS

 

BT

TWS

 

BT pairing ...

Battery

Reviews: