background image

START HERE: Installation, Safety, and Regulatory

Information for the Aruba 2930F Switches and

Accessories

All product documentation

For the latest release of hardware and software documentation for Aruba 2930F switches and accessories, visit the Aruba
Support Portal at the following link. Filter for the publications you want:

http://asp.arubanetworks.com/downloads

See the rest of this guide for important presetup information.

WARNING: 

There are no user-serviceable parts in the Aruba 2930F 8G, 24G, or 48G switches, or the AC

adapter used with the 8G switches. For switch or accessory service needs, contact an authorized Aruba
representative.

Applicable products

PoE switches

Non-PoE switches

Aruba 2930F 8G PoE+ 2SFP+ Switch

Aruba 2930F 8G PoE+ 2SFP+ TAA Switch

Aruba 2930F 24G PoE+ 4SFP+ Switch

Aruba 2930F 48G PoE+ 4SFP+ Switch

Aruba 2930F 24G PoE+ 4SFP Switch

Aruba 2930F 48G PoE+ 4SFP Switch

Aruba 2930F 24G PoE+ 4SFP+ TAA Switch

Aruba 2930F 48G PoE+ 4SFP+ TAA Switch

Aruba 2930F 48G PoE+ 4SFP 740W Switch

Aruba 2930F 48G PoE+ 4SFP+ 740W Switch

Aruba 2930F 48G PoE+ 4SFP+ 740W TAA
Switch

JL258A

JL692A

JL255A

JL256A

JL261A

JL262A

JL263A

JL264A

JL557A

JL558A

JL559A

Aruba 2930F 24G 4SFP+ Switch

Aruba 2930F 48G 4SFP+ Switch

Aruba 2930F 24G 4SFP Switch

Aruba 2930F 48G 4SFP Switch

JL253A

JL254A

JL259A

JL260A

180W AC Power Adapter

1

5066-5559

Included with the Aruba 2930F 8G JL258A and JL692A switches. All other 2930F switches operate with internal power supplies.

*5200-6237*

©

 Copyright , Hewlett Packard Enterprise Development LP

Part Number: 5200-6237
Published: May 2019
Edition: 1

Summary of Contents for 2930F Series







Reviews: