background image

START HERE: Installation, Safety, and Regulatory

Information for the Aruba Instant On 1930 Switches

All product documentation

For the latest release of hardware and software documentation for Aruba Instant On 1930 switches and accessories,

visit the Aruba Support Portal at the following link and click Support.
https://www.arubainstanton.com/
See the rest of this guide for important presetup information.

WARNING: There are no user-serviceable parts in the Aruba Instant On 1930 switches, or the AC

adapter used with the 8G switch. For switch or accessory service needs, contact an authorized Aruba

representative.

Applicable products

Aruba Instant On 1930 8G 2SFP Switch

JL680A

AC Power Adapter:

1

• 13W External AC Adapter (5066-5562)
• 13W External AC Adapter (5184-5864)
• 13W External AC Adapter (5300-1005)
• 15W External AC Adapter (5066-5563)

Aruba Instant On 1930 8G Class4 PoE 2SFP

124W Switch

JL681A

Aruba Instant On 1930 24G 4SFP/SFP+

Switch

JL682A

Aruba Instant On 1930 24G Class4 PoE

4SFP/SFP+ 195W Switch

JL683A

Aruba Instant On 1930 24G Class4 PoE

4SFP/SFP+ 370W Switch

JL684A

Aruba Instant On 1930 48G 4SFP/SFP+

Switch

JL685A

Aruba Instant On 1930 48G Class4 PoE

4SFP/SFP+ 370W Switch

JL686A

Used with the JL680A Aruba Instant On 1930 8G 2SFP Switch. All other Aruba Instant On 1930 switches operate with internal

power supplies. For more information on power adapters, see the latest Installation and Getting Started Guide for your Aruba

Instant On 1930 Switch.

*5200-5868*

©

 Copyright 2020 Hewlett Packard Enterprise Development LP

Part Number: 5200-5868

Published: January 2020

Edition: 1

Summary of Contents for Instant On 1930 Series









Reviews: