To obtain warranty service for your Audibox, call, write, or
Email to ARX or the dealer you purchased it from. They
will give you the correct address to send your unit to. Have
your sales receipt showing date of purchase handy, and in-
clude a copy of it with your Audibox. Please pack the unit
well - we are not responsible for any damage caused by
unsuitable packing during shipment. Send the unit to us pre-
paid, by a delivery service like FedEx, UPS, or any other
service that can track the shipment. We will return it to you
freight paid. If you have any questions, or any part of this is
unclear, please write to ARX Systems in the country of pur-
chase, or to the address below.
PO Box 15,Moorabbin, Victoria 3189, Australia. Phone: +61
(0)3 9555 7859 Fax: +61 (0)3 9555 6747
You can Email the factory at:
info@arx.com.au
Page 7
Page 6
Page 4
Page 5
ARX Systems (ARX) warrants to the first purchaser of this Audibox
product that it is free from defects in materials and workmanship
under normal use and service. ARX’s sole obligation under this war-
ranty shall be to provide, without charge, parts and labour neces-
sary to remedy defects, if any, which appear within twelve (12)
months from date of purchase; and to supply parts only for the life
of the product to the original purchaser.
This is our sole warranty. It does not cover finish or appearance
items, nor does it apply if the Audibox has been, in ARX’s sole judge-
ment:
• Subjected to misuse, abuse, negligence or accident;
• Repaired, worked on, or altered by persons not authorized by ARX,
• Connected, installed, adjusted or used otherwise than in accord-
ance with the instructions supplied by ARX.
This warranty gives you and us specific legal rights, and you may also
have other rights which can vary from state to state.
INTERNATIONAL LIFETIME WARRANTY
As well as the
AV-DI
, ARX manu-
facture other products in the unique
Audibox range:
The
ISO-Balancer
for balancing
unbalanced signals, and also the
ISO
De-Balancer
, which will de-bal-
ance a signal when required to con-
nect to an unbalanced input.
The
ISO-Later
is a Dual channel
Unbalanced to Balanced Low Im-
pedance transformer isolated con-
verter, and the
ISO Splitter
is a
transformer isolated 1 input to 2
outputs splitter for splitting 1 input
2 ways in applications where com-
plete Galvanic isolation is required.
Both available in Single Channel or
Double Header format.
The
Ear Driver
is a Headphone
Amplifier with 2 pairs of Stereo in-
puts each feeding two channels of
headphone level outputs. It has in-
dividual Level controls plus a 12 -
15VDC power connector. A com-
pact, flexible unit
The
Pro-D
I is an ultra compact Ac-
tive Direct box, with normal High
Impedance input as well as a sepa-
rate speaker level input for connec-
tion to instrument amplifiers.
Other features include –20dB Pad
and Audio Ground Lift switches,
Did you know...
plus Phantom or DC power options.
Available in Single Channel or Dou-
ble Header format
The
DI-Pre
is an Ultra compact Mi-
crophone Pre amp with XLR input,
balanced jack output and 10 to 60dB
Gain control.
Other features include –20dB Pad
switch, Clip LED and Phantom Power
switch, plus DC power connector.
Available in Single Channel or Dou-
ble Header format
For the latest information on the
complete Audibox range, visit our
website:
www.arx.com.au/audibox.htm
Using your Audibox
The AV-DI is a Direct Injection, or
Direct, box. It is a self contained,
stand alone stereo unit designed to
interface a left and right pair of un-
balanced high impedance lines with
professional balanced low imped-
ance inputs. In other words, it will
convert consumer audio signals into
ones that are happy to travel down
a long line and meet a mixing con-
sole at the other end. It has many
applications for Live Sound, Studio
or Broadcast use.
Typical input types are:
• Consumer audio products - MP3
players, laptop computer sound
cards, CD players, audio from DVD
players, cassette decks, tape decks,
VCR audio and more
Operating instructions
Input Connections
A stereo high
impedance source (instrument, un-
balanced lines or similar) plugs into
Inputs A and B (typically Left to A
and Right to B). Pushing the Pad
switch IN will reduce both input lev-
els by -20dB if required.
Special Note. The AV-DI is a Line
level device, so it is not designed to
accept Microphone level signals.
Output Connections
Connect a
balanced microphone lead from
each 3 pin XLR connector on the
Specifications
AV DI
Input Impedance
47K Ohms unbalanced
Max Input Level
Line +8 dB with Pad switch Out,
+ 28dB with Pad switch In
Gain through Unit
6dB, Pad switch Out.
Output Noise
-90 dB Unweighted
-97 dB 'A' weighted, inputs loaded
Frequency Response
20 - 20 KHz ± 0.3 dB
Power
Phantom Power from mixing console;
12 - 15 VDC from external supply,
wired outer sleeve –, inner +
Input Connectors
Left and Right RCA (phono) connectors,
plus Tip-Ring-Sleeve Mini Jack
Output Connectors
Dual 3 pin XLR wired Pin 1 Ground,
Pin 2 + Hot, Pin 3 – Cold.
Construction
All-steel powdercoated chassis,
fibreglass PCB, epoxy printing
AV-DI to a pair of input channels on
the mixing console. Pan the channels
Left or Right as required.
The full-time Soft Ground connection
Grounds both Pin 1 outputs of the AV-
DI through a resistive network to pre-
vent Ground Loops.
Power Requirements
The AV-DI is an active device,
ie.
it
needs power to run. This power can
be supplied 2 ways:
•
Phantom power:
The AV-DI will
also run on Phantom power if avail-
able on the console. Switch the Phan-
tom power ON on the channel(s) the
AV-DI is plugged into, and the Phan-
tom power LED will light up on the
AV-DI to show that it is running on
Phantom power
.
• External 12 - 15 V DC power:
The AV-DI has a DC input connector
for running the unit on an external 12
- 15 V DC power supply. Any 12V DC
wall connector capable of supplying
200 mAmps will work, although for
greatest headroom we recommend
the Audibox PSU which can supply 15
V DC to multiple Audibox devices.
Note the wiring of the connector: the
outer sleeve is –, the inner is +.
