background image

MIXX Series Owner's Manual   v 2.6CE ©2003 ARX®

MIXX Series Owner's Manual   v 2.6CE ©2003 ARX®

8

Installer

TM

Series

MIXX

and

MIXXMaster

OWNER’S

MANUAL

ARX

ARX

ARX

ARX

ARX Systems Pty Ltd,  PO  Box 15,

Moorabbin, Victoria 3189, Australia

Phone

Phone

Phone

Phone

Phone: (03) 9555 7859 Fax

Fax

Fax

Fax

Fax: (03) 9555 6747

International Fax

International Fax

International Fax

International Fax

International Fax: +61-3 -9555 6747

On the Web

On the Web

On the Web

On the Web

On the Web: www.arx.com.au

Email

Email

Email

Email

Email: info@arx.com.au

INTERNATIONAL LIMITED WARRANTY

ARX Systems (ARX) warrants to the first purchaser of any ARX equipment that it is
free from defects in materials and workmanship under normal use and service.
ARX’s sole obligation under this warranty shall be to provide, without charge, parts
and labour necessary to remedy defects, if any, which appear within twelve (12)
months from date of purchase, and for a further twelve (12) months supply parts only.

This is our only warranty

. It does not cover finish or appearance items, burned voice

coils, or if the equipment has been, in ARX’s sole judgement:

•Subjected to misuse, abuse, negligence or accident;

•Repaired, worked on, or altered by persons not authorized by ARX;

•Connected, installed, adjusted or used for a purpose other than that for which it was
designed. This includes running a speaker system with the ISC leads disconnected,
or with a non-ARX crossover, or with the wrong processor.

This warranty gives you and us specific legal rights and you may also have other
rights which may apply.

Warranty Service Procedure

Should it become necessary to have your equipment serviced under the

terms of the warranty, please follow these steps:
1.  Call your ARX distributor for a Return Authorization (RA) number;
2. 

 Carefully

 repack the unit, in its original packaging where possible, includ-

ing a note with a description of the problem, and a copy of the receipt

showing date of purchase. Attach these to the actual unit itself. Don’t

forget to write your name and address clearly, and include a phone

number where you can be contacted during normal business hours. Make

it easy for our service technicians to contact you if they have a question.

Also, use 

plenty

 of packing material - better to be safe than sorry.

3.  Send the unit freight prepaid to ARX Systems, at the address given you

with your RA number. We will pay the return freight when the serviced

unit is returned to you.

We strongly recommend you insure the package. We can’t fix it if it gets lost!

Send it by UPS, Fedex, or any similar service that can track the package.

Parcel Post is 

not

 recommended

If Warranty Registration Card is missing, please write to ARX in the country of

purchase, stating model and where purchased, or to ARX, PO Box 15, Moorabbin,

Victoria 3189, Australia.
Or you can Email us at: info@arx.com.au

Summary of Contents for MIXX

Page 1: ...ned This includes running a speaker system with the ISC leads disconnected or with a non ARX crossover or with the wrong processor This warranty gives you and us specific legal rights and you may also have other rights which may apply Warranty Service Procedure Should it become necessary to have your equipment serviced under the terms of the warranty please follow these steps 1 Call your ARX distr...

Page 2: ... 5 pin DIN connector with shielded cable Power 100 120 220 240 VAC 50 60HZ 8VA 8 watts 3 pin IEC connector with removable cable This symbol indicates that a Slow Blow fuse is used in this equip ment Replace with same type and value only This symbol is intended to alert you to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constit...

Page 3: ...ity for microphones that have a HIGHER output Note Use a plastic TV type trimmer or a fully insulated screwdriver ONLY Adjust the gain in small increments Remember that a little movement is a lot of change Pressing the Mic Line switch IN actvates a 20dB pad making the input suitable for Line levels MIXX Rear Panel Connectors Balanced XLR Input socket one per channel Pin 2 HOT Pin 3 Cold Pin 1 GROU...

Page 4: ...hen designate one of them as the Master and the other s as Slaves by pressing the rear mounted switch Each Microphone and Stereo Line input has 3 way EQ plus Balanced Low Noise Microphone inputs Hi Z line inputs and Balanced Line outputs All Mic Channels also have a direct output ideal for recording applications Switchable Phantom power is available on all Mic Inputs 3 x MIXXMasters set up as 1 Ma...

Reviews: