GREAT BRITAIN • CUSTOMER SERVICE
tel: 020 8247 9300 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.co.uk postal: 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
ENGLISH
1 2
3
4
8
9
5
6
7
Ver
. 20171107
Head Torch 10 W/500 lm
Art.no 36-6346
Model MF-H09
Please read the entire instruction manual before using the product and
then save it for future reference. We reserve the right for any errors in
text or images and any necessary changes made to technical data.
If you have any questions concerning technical problems please
contact our Customer Services.
Safety
• Do not point the light beam into anyone’s eyes.
• Do not let children play with the product.
• Never charge the torch in flammable environments or on
flammable surfaces.
• Only use the included rechargeable battery.
• Only use the included charger for charging the battery.
• Never immerse the head torch in water or other liquid.
• Never expose the battery to high temperatures or naked flames.
• Avoid contact with leaking batteries.
• The charger is designed for indoor use only.
Product description
Inserting the battery
Direct turbo mode
If the head torch is switched off it can be switched on directly in
the turbo mode (extra bright 500 lm). Hold the power switch in for
more than 2 seconds until the torch shines very brightly.
Care and maintenance
• Clean the torch using a soft, damp cloth.
• Never use cleaning agents or other chemicals.
Responsible disposal
1. Power button
2. LED Bulb
3. Battery type 18650 (1 ×)
4. Battery cover
5. Charger
6. Charging indicator
7. Charger lead
8. Headband
9. Belt clip
Charging the battery
The head torch battery may only be charged in the included charger.
1. Insert the rechargeable battery (type 18650) into the charger,
observe the polarity markings.
2. Connect the charger lead to the charger and other USB charger.
3. The charging indicator shows the charging status. When all the
indicators shine constantly the battery is fully charged.
4. Charging normally takes about 5 hours.
Operating instructions
1. Insert the battery (type 18650) into the head torch, observing
the polarity markings.
2. Press the power switch (1) to turn the head torch on. Select
the desired mode by pressing the power switch the required
number of times:
Setting the light mode
Press the power switch repeatedly to advance through the sequence
of power settings: Very low – low – medium – high – turbo – very low
and so on.
Switching the torch off
Holding the power switch pressed in for more than 1 second will
switch the torch off.
Extra functions
Switch the head torch on to the most recent
power setting
The head torch has a built-in memory. If the head torch is switched
off it can be switched on directly to the power setting that it was last
used on by holding the power switch in for more than 1 second.
This symbol indicates that this product should not be
disposed of with general household waste. This applies
throughout the entire EU. In order to prevent any harm to
the environment or health hazards caused by incorrect
waste disposal, the product must be handed in for
recycling so that the material can be disposed of in
a responsible manner. When recycling your product, take
it to your local collection facility or contact the place of
purchase. They will ensure that the product is disposed
of in an environmentally sound manner.
Specifications
Charger
Input 5 V DC, 1 A (USB),
Output 4.2 V DC, 1000 mA
Battery
Li-ion-battery 2800 mAh (type 18650) (1 ×)
Operating time
Up to 2 hours 15 minutes (on high power)
Colour temperature
6000 K
Beam angle
45°
Colour rendition
Ra 70
Power
10 W
Light output
Very low (1 lm), low (70 lm), medium (200 lm),
high (350 lm), turbo (500 lm)
Operating temperature
−20 to +50 ºC
Ingress protection
IP44
Weight
41/135 g (without/with battery and headband)
Size
98.5 × Ø 25 mm
Unscrew the battery
cover (4) and insert
the included rechargeable
type 18650 battery
(3) in accordance with
the polarity markings.
